34013 Blower Motor for CITROEN
Primary OE reference: 34013
Cross-reference 1: 87050
Cross-reference 2: DEA07004
Cross-reference 3: V22031831
Cross-reference 4: 698325
Product type: Automotive HVAC Blower Motor
Applicable vehicle: CITROEN
Brand: CITROEN
Model: Confirm by OE reference
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Stable wheel rotation helps distribute air without relying on vehicle speed, making the blower important at idle and in traffic.
Installation guidance: If airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the motor is the only cause.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
34013 Automotive Blower Motor Overview
The 34013 record is prepared for application-specific HVAC blower replacement and wholesale quotation.
For catalogue item 6204-084, When the climate-control circuit commands 34013 airflow, the electric motor rotates the 34013 fan wheel inside the HVAC housing. Use 6204-084 when comparing this 34013 airflow configuration.
OE Reference and Application
The primary catalogue number is 34013. The recorded application is CITROEN. For 6204-084, Verify the complete suffix on the OE number because nearby references can use different plugs or mounting geometry. Record 6204-084 with the approved OE reference.
HVAC Interface and 34013 installation
During work on 6204-084, If 34013 airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the 34013 motor is the only cause. Recheck 6204-084 before the lower trim is closed.
For item 6204-084, confirm that the 34013 centrifugal wheel clears its housing and that the 6204-084 connector lock engages without force. After seating 6204-084, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6204-084.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 34013 |
| Cross-reference numbers | 87050 / DEA07004 / V22031831 / 698325 |
| Vehicle brand | CITROEN |
| Vehicle model | Confirm by OE reference |
| Model year | Confirm by OE reference |
| 34013 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6204-084, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6204-084 record remains the picking reference.
For trade item 6204-084, For repeat orders, quote the same SKU and OE reference while noting any change in vehicle market or steering position. Keep 6204-084 on the packing instruction.
Frequently Asked Questions
How should item 6204-084 and blower number 34013 be verified?
Match 6204-084 to the complete 34013 marking, then compare the 6204-084 plug, terminal count, mounting flange and wheel dimensions with the removed CITROEN unit.
Can 6204-084 have more than one vehicle-side blower configuration?
Yes. CITROEN production changes can affect 6204-084; confirm steering position, climate-control specification and the original 6204-084 geometry before approval.
What circuit checks are useful when 6204-084 does not operate?
For 6204-084, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6204-084 motor again.
Which details should accompany a wholesale request for 6204-084?
Provide item 6204-084, OE 34013, the stated application, quantity and destination; add 6204-084 carton or private-label requirements separately.
How can noise be avoided after fitting 6204-084?
Clear debris from the air inlet, check that the 6204-084 wheel turns freely, seat the 6204-084 flange evenly and keep wiring away from the impeller.
Request a quote for 6204-084: Send 34013, the 6204-084 application and required quantity for a fitment and supply review.
