33555-TP5-H01 Rear Bumper Light for HONDA Spirior 2009 Left
Primary OE reference: 33555-TP5-H01
Product type: Rear Bumper Light
Applicable vehicle: HONDA Spirior 2009
Installation position: Rear bumper / reflector opening
Side / orientation: Left
Brand: HONDA
Model: Spirior
Vehicle year: 2009
Shape and clips: Review the corner radius, edge return and rear fastening points against the original bumper opening.
Rear visibility role: Function and fit are linked: the correct optical face must also align with the bumper surface and surrounding trim.
Powered-version check: Confirm separately whether the removed component uses wiring, a bulb holder or an integrated LED module.
Workshop guidance: Check the mounting direction and side before installation; left and right components are not automatically interchangeable.
Selection context: Bumper designs can change during a model cycle, so verify the lens face and hidden support points together.
Post-fit check: Make sure the component does not touch hot exhaust trim or trap wiring against a sharp body edge.
Quotation details: Send front and rear photographs when the bumper uses several visually similar lens or wiring configurations.
Packing reference: Side-specific labels reduce picking mistakes during consolidation of mixed bumper-light orders.
33555-TP5-H01 Rear Bumper Light Overview
This product is listed for HONDA Spirior 2009 at the left rear-bumper position. This component completes the rear bumper lighting area and must match the correct side, lens type and vehicle trim.
Compare both the visible surface and the rear attachment geometry to avoid selecting a cosmetic look-alike.
While the HONDA bumper opening is accessible, compare the bumper corner radius with the product face from more than one viewing angle so the lens and housing are supported without distortion.
Model, Year and Side Confirmation
Use the product photograph to compare the exposed face and the concealed bracket layout as one assembly.
A correct vehicle name is only the starting point; market trim and facelift details can change the reflector opening.
During comparison of the HONDA rear component, align each locating tab with the matching slot before applying hand pressure so a passive reflector is not confused with an illuminated assembly.
For a repeat order of the left version, check whether the original component uses a separate retainer or an integral locking tab to verify that the photographed configuration matches the vehicle in the workshop.
Reflector Housing and Wiring Details
Confirm separately whether the removed component uses wiring, a bulb holder or an integrated LED module.
Inspect the moulded tabs from the rear and avoid placing package or hand pressure on the centre of the lens.
On the 2009 Spirior bumper layout, verify the fastener direction and the shape of the concealed support frame to avoid contact with wiring, body edges or hot exhaust components.
At the workshop selection stage for Spirior, protect the visible surface until the full perimeter gap has been accepted to keep the optical face level with the surrounding painted surface.
Installation Preparation
Check the mounting direction and side before installation; left and right components are not automatically interchangeable.
Verify that bumper movement does not load the lens and that the component remains fully clipped at every corner.
At the left rear-bumper position, review the reflector texture and lens colour in neutral workshop light before any modification is made to the bumper or replacement part.
When reviewing the 2009 vehicle, record the approved side and vehicle application for repeat-order identification before deciding whether original hardware is suitable for reuse.
Automotive Lighting Product Specifications
| Product type | Rear Bumper Light |
|---|---|
| Primary OE reference | 33555-TP5-H01 |
| Cross-reference numbers | 33555-TP5-H01 |
| Internal item code | HD04004-018 |
| Vehicle brand | HONDA |
| Vehicle model | Spirior |
| Model year | 2009 |
| Installation position | Rear bumper / reflector opening |
| Side / orientation | Left |
| Configuration | Match the photographed reflector or powered-lamp version |
Wholesale Supply and Protective Packing
For repeat orders, quote the vehicle application and side together so the correct bumper variant is selected.
Projecting tabs should be supported with shaped material instead of carrying the weight of other products.
For the HONDA Spirior application, confirm that the cable exit, where fitted, clears the bumper reinforcement because facelift bumpers can retain the same vehicle name with different apertures.
For this Spirior body configuration, confirm that any connector seal remains square when the housing is fully seated so left- and right-hand stock cannot be mixed during consolidation.
Frequently Asked Questions
Should original clips be reused?
Reuse hardware only when it is undamaged and correct for the photographed housing; replace distorted retainers.
What if the bumper opening differs?
Stop the installation and compare market version, trim level and hidden mounting geometry before modifying any part.
Which physical points matter most?
Compare exposed shape, housing depth, locating tabs, fastener spacing and any electrical connector.
What details help with a wholesale quote?
Provide vehicle, year, side, quantity, destination and clear photographs of the removed component.
Is this component illuminated or reflector-only?
Use the product photographs to confirm whether the rear body carries a connector, bulb holder or LED wiring.
Request a Product-Specific Quote
For mixed shipments, send a line-by-line quantity list so each rear-bumper position is quoted independently.
