33555-3V0-H01 Rear Bumper Light for HONDA CR-V 2023 Left
Primary OE reference: 33555-3V0-H01
Product type: Rear Bumper Light
Applicable vehicle: HONDA CR-V 2023
Installation position: Rear bumper / reflector opening
Side / orientation: Left
Brand: HONDA
Model: CR-V
Vehicle year: 2023
Shape and clips: Compare the visible outline, rear housing depth and locating tabs with the removed part before ordering.
Rear visibility role: Function and fit are linked: the correct optical face must also align with the bumper surface and surrounding trim.
Powered-version check: Where a cable is fitted, inspect the seal and connector keying so the replacement does not introduce moisture or terminal stress.
Workshop guidance: Check the mounting direction and side before installation; left and right components are not automatically interchangeable.
Selection context: A correct vehicle name is only the starting point; market trim and facelift details can change the reflector opening.
Post-fit check: After installation, confirm the lens is level with nearby trim and that no retaining tab has backed out.
Quotation details: For a wholesale quotation, provide vehicle details, required side, quantity, destination and a photograph of the removed part.
Packing reference: Side-specific labels reduce picking mistakes during consolidation of mixed bumper-light orders.
33555-3V0-H01 Rear Bumper Light Overview
This product is listed for HONDA CR-V 2023 at the left rear-bumper position. Some versions are passive reflectors, while others contain a lamp or wiring. The photographed configuration defines the supplied type.
Production date and regional bumper specification should be reviewed when several near-identical versions are available.
When reviewing the 2023 vehicle, verify the fastener direction and the shape of the concealed support frame to reduce clip damage during a no-force trial installation.
Physical Fitment Evidence
Use the product photograph to compare the exposed face and the concealed bracket layout as one assembly.
Check whether the bumper carries a plain reflector or an illuminated unit before approving the replacement.
For the HONDA CR-V application, protect the visible surface until the full perimeter gap has been accepted to prevent a visually similar version from sitting proud of the bumper.
For this CR-V body configuration, review the reflector texture and lens colour in neutral workshop light before the packaging and carton marking are finalized.
Surface, Seal and Electrical Interface
Where a cable is fitted, inspect the seal and connector keying so the replacement does not introduce moisture or terminal stress.
Protect the exposed face from tools and fasteners while the bumper liner is open for access.
Before approving the CR-V part for packing, record the approved side and vehicle application for repeat-order identification before inner liners make the rear attachment points difficult to inspect.
Before fitting the left unit, confirm that the cable exit, where fitted, clears the bumper reinforcement so the visible gap remains even after every retaining point is engaged.
Bumper Assembly Check
Check the mounting direction and side before installation; left and right components are not automatically interchangeable.
Photograph the completed fit for repeat-order records when the vehicle uses an uncommon market specification.
While the HONDA bumper opening is accessible, confirm that any connector seal remains square when the housing is fully seated so the lens and housing are supported without distortion.
During comparison of the HONDA rear component, use the opposite-side component only as an alignment reference, not as an interchange part so a passive reflector is not confused with an illuminated assembly.
Automotive Lighting Product Specifications
| Product type | Rear Bumper Light |
|---|---|
| Primary OE reference | 33555-3V0-H01 |
| Cross-reference numbers | 33555-3V0-H01 |
| Internal item code | HD04004-081 |
| Vehicle brand | HONDA |
| Vehicle model | CR-V |
| Model year | 2023 |
| Installation position | Rear bumper / reflector opening |
| Side / orientation | Left |
| Configuration | Match the photographed reflector or powered-lamp version |
Wholesale Supply and Protective Packing
Trade enquiries should include the vehicle year, model, bumper position and destination market for accurate picking.
Projecting tabs should be supported with shaped material instead of carrying the weight of other products.
For a repeat order of the left version, compare the outer lens edge with the moulded bumper recess to verify that the photographed configuration matches the vehicle in the workshop.
On the 2023 CR-V bumper layout, inspect the lower valance and nearby exhaust trim for adequate operating clearance to avoid contact with wiring, body edges or hot exhaust components.
Frequently Asked Questions
What details help with a wholesale quote?
Provide vehicle, year, side, quantity, destination and clear photographs of the removed component.
Is this component illuminated or reflector-only?
Use the product photographs to confirm whether the rear body carries a connector, bulb holder or LED wiring.
What should be tested after fitting?
Check panel alignment and, for powered versions, verify the intended rear-lighting function before closing access panels.
Can appearance alone confirm compatibility?
No. A similar colour and outline can hide different clips, housing depth, wiring or side orientation.
Why can the same model year use another version?
Regional equipment, facelift changes and bumper trim packages can alter the opening or electrical configuration.
Request a Product-Specific Quote
Clear application details allow the sales team to separate reflector and illuminated versions in the offer.
