33150-TLA-A11 Head Light for HONDA CR-V 2017-2022 Left
Primary OE reference: 33150-TLA-A11
Cross-reference number 1: 33150-TLA-A11
Product type: Head Light Assembly
Applicable vehicle: HONDA CR-V 2017-2022
Installation position: Left front headlamp position
Brand: HONDA
Model: CR-V
Vehicle year: 2017-2022
Lighting configuration: halogen lighting
Housing comparison: Lay the replacement beside the removed unit and compare overall depth, edge returns, vent locations and rear-cover clearance.
Optical system: Review reflector colour, projector presence and any decorative internal trim before approving a left/right pair for one vehicle.
Electrical interface: Review terminal count, plug orientation and the location of removable caps before transferring bulbs or reusable electronics.
Mounting points: A correct assembly should align at the locating points without drilling, trimming or forcing the vehicle-side brackets.
Installation guidance: Use recommended workshop procedures for removal and refitting, then validate that vibration, panel pressure and cable routing do not stress the housing.
Wholesale packing: For repeat orders, keep the approved product photographs and application record so the same optical and mounting version is specified.
Application-specific focus: For the left HONDA CR-V application with halogen lighting, review reflector colour, projector presence and any decorative internal trim before approving a left/right pair for one vehicle.
Head Light Assembly Overview
The listed unit is designed for the stated vehicle position and should be matched to the removed headlamp before installation. It is catalogued under OE reference 33150-TLA-A11 for HONDA CR-V 2017-2022, with the left position identified in the source record.
The visible lens, internal optical layout, rear casing and attachment points should be reviewed as one system. A close-looking lamp from another trim or market can differ behind the body opening.
Lighting Function and Optical Configuration
Inspect reflector colour, projector presence and any decorative internal trim before approving a left/right pair for one vehicle.
For the CR-V application, verify the lighting package fitted to the vehicle. Standard, projector, xenon and LED versions can use alternative internal modules, beam controls and daytime-light signatures.
Vehicle Fitment and Body Interface
Confirm that the headlamp sits naturally in the body opening and follows the bonnet, grille and fender lines without forced alignment.
A correct assembly should align at the locating points without drilling, trimming or forcing the vehicle-side brackets.
Connector and Control Hardware
Confirm compatibility with the vehicle’s lighting controls, especially where automatic levelling or daytime-running-light functions are fitted.
Confirm the supply scope shown in the product photographs. Bulbs, rear caps, levelling motors, ballasts, LED drivers and auxiliary brackets may vary between versions and should be checked separately.
Installation and Beam Alignment
Use recommended workshop procedures for removal and refitting, then validate that vibration, panel pressure and cable routing do not stress the housing.
A qualified workshop should inspect surrounding supports for damage, complete the electrical tests and set the headlamp beam according to local requirements after installation.
Automotive Lighting Product Specifications
| Product type | Head Light Assembly |
|---|---|
| Primary OE reference | 33150-TLA-A11 |
| Cross-reference numbers | 33150-TLA-A11 |
| Internal item code | HD04001-008 |
| Vehicle brand | HONDA |
| Vehicle model | CR-V |
| Model year | 2017-2022 |
| Installation position | Left front |
| Lighting configuration | halogen lighting |
Wholesale Supply and Protective Packing
Left and right units should be labelled separately, and internal supports should keep the lamp from moving inside the export carton.
When requesting a quotation, supply the vehicle application, production period, required side, lighting technology, quantity and destination. Original-lamp photographs are useful when several versions exist.
Application-Specific Comparison Notes
For this left HONDA CR-V headlamp, the halogen lighting specification should be assessed together with the 2017-2022 body application. Use the original assembly to inspect the shell profile, upper support shape and clearance around adjacent trim before installation.
The left CR-V lighting package should remain the reference during electrical review. Evaluate every plug and socket with the original unit and validate whether the levelling motor, ballast or LED driver is included or transferred.
When fitting the HONDA CR-V unit at the left front position, preserve even body gaps and the intended beam orientation. Complete a no-force trial fit first; once the panel gaps are even, secure the unit and adjust the beam to workshop specifications.
Frequently Asked Questions
How should the lamp be protected during shipping?
The lens needs isolation from carton pressure, while the rear housing and projecting tabs require stable internal support.
Why must the rear housing be compared?
A similar lens can conceal a alternative casing depth, cap arrangement or bracket offset, preventing correct seating in the body opening.
What distinguishes nearby lighting variants?
Reflector, projector, xenon and LED versions can differ in modules, daytime-light layout, internal bezel and plug configuration.
Can a headlamp be chosen by appearance alone?
No. The left lamp must also agree with the optical system, electrical interface, mounting features and market specification.
Are bulbs and electronic modules included?
The included components are those visible in the product photographs. Review bulbs, caps, motors, ballasts and LED modules separately.
