33100-TLA-A11 Head Light for HONDA CR-V 2017-2022 Right
Primary OE reference: 33100-TLA-A11
Cross-reference number 1: 33100-TLA-A11
Product type: Head Light Assembly
Applicable vehicle: HONDA CR-V 2017-2022
Installation position: Right front headlamp position
Brand: HONDA
Model: CR-V
Vehicle year: 2017-2022
Lighting configuration: halogen lighting
Housing comparison: Lay the replacement beside the removed unit and evaluate overall depth, edge returns, vent locations and rear-cover clearance.
Optical system: Check reflector colour, projector presence and any decorative internal trim before approving a left/right pair for one vehicle.
Electrical interface: The electrical interface should seat without modification, and the harness must reach the connection without tension or contact with sharp edges.
Mounting points: A correct assembly should align at the locating points without drilling, trimming or forcing the vehicle-side brackets.
Installation guidance: Tighten the fasteners evenly, restore surrounding covers only after functional testing, and check bonnet and bumper clearances one final time.
Wholesale packing: Carton protection should prevent abrasion on the lens and impact loading on brackets, caps, adjusters or exposed control modules.
Application-specific focus: For the right HONDA CR-V application with halogen lighting, review the lens pattern, internal bezel finish and optical modules so the selected unit matches the intended lighting package.
Head Light Assembly Overview
The listed unit is designed for the stated vehicle position and should be matched to the removed headlamp before installation. It is catalogued under OE reference 33100-TLA-A11 for HONDA CR-V 2017-2022, with the right position identified in the source record.
The photographed lens, internal optical layout, rear casing and attachment points should be reviewed as one system. A close-looking lamp from another trim or market can differ behind the body opening.
Lighting Function and Optical Configuration
Verify reflector colour, projector presence and any decorative internal trim before approving a left/right pair for one vehicle.
For the CR-V application, verify the lighting package fitted to the vehicle. Standard, projector, xenon and LED versions can use distinct internal modules, beam controls and daytime-light signatures.
Vehicle Fitment and Body Interface
Review the complete lamp body from several angles because a similar lens can conceal a distinct rear casing or bracket offset.
A correct assembly should align at the locating points without drilling, trimming or forcing the vehicle-side brackets.
Connector and Control Hardware
Compare every plug and socket with the original unit and verify whether the levelling motor, ballast or LED driver is included or transferred.
Verify the supply scope shown in the product photographs. Bulbs, rear caps, levelling motors, ballasts, LED drivers and auxiliary brackets may vary between versions and should be checked separately.
Installation and Beam Alignment
Keep wiring clear of hot or moving components, then test low beam, high beam, indicator and daytime lighting where applicable.
A qualified workshop should look over surrounding supports for damage, complete the electrical tests and set the headlamp beam according to local requirements after installation.
Automotive Lighting Product Specifications
| Product type | Head Light Assembly |
|---|---|
| Primary OE reference | 33100-TLA-A11 |
| Cross-reference numbers | 33100-TLA-A11 |
| Internal item code | HD04001-007 |
| Vehicle brand | HONDA |
| Vehicle model | CR-V |
| Model year | 2017-2022 |
| Installation position | Right front |
| Lighting configuration | halogen lighting |
Wholesale Supply and Protective Packing
For repeat orders, record the approved product photographs and application record so the same optical and mounting version is selected.
When requesting a quotation, include the vehicle application, production period, required side, lighting technology, quantity and destination. Original-lamp photographs are useful when several versions exist.
Application-Specific Comparison Notes
For this right HONDA CR-V headlamp, the halogen lighting specification should be assessed together with the 2017-2022 body application. Verify the inner and outer corners of the housing as well as the gap to adjacent panels; these points often separate neighbouring variants.
The right CR-V lighting package should remain the reference during electrical review. Verify compatibility with the vehicle’s lighting controls, especially where automatic levelling or daytime-running-light functions are fitted.
When fitting the HONDA CR-V unit at the right front position, preserve even body gaps and the intended beam orientation. After the housing is secured, reconnect the lighting circuit, test every function and carry out professional beam aiming before road use.
Frequently Asked Questions
What should be checked before installation?
For the CR-V, look over the vehicle supports, cross-check every fixing point, verify the connector and complete a no-force trial fit.
What information supports a wholesale quotation?
State the HONDA CR-V application, production year, right side, lighting version, quantity and delivery country.
Why must the rear housing be compared?
A similar lens can conceal a distinct casing depth, cap arrangement or bracket offset, preventing correct seating in the body opening.
Can a headlamp be chosen by appearance alone?
No. The right lamp must also match the optical system, electrical interface, mounting features and market specification.
How should headlamp fitment be confirmed?
For the right CR-V lamp, compare the body outline, mounting tabs, connector and lighting technology with the removed unit. Model year alone may not distinguish every trim.
