2S6A-13K354-AD Fender Light for FORD Focus 2005
Primary OE reference: 2S6A-13K354-AD
Cross-reference number 1: 4360568
Product type: Fender Light / Side Marker Lamp
Applicable vehicle: FORD Focus 2005
Installation position: Front fender / side marker opening
Side / orientation: Confirm from original part
Brand: FORD
Model: Focus
Vehicle year: 2005
Physical comparison: Compare the moulded parting line, locating peg and fastener boss before accepting the replacement geometry.
Lighting function: The lamp provides a compact signalling point whose beam direction depends on correct left-right placement.
Electrical check: Verify the socket or plug style and check that the seal remains square when the connector is locked.
Installation guidance: Keep the painted panel protected, then verify an even perimeter gap after every locating point is engaged.
Selection context: Use the fender opening dimensions when catalogue descriptions list several applications for one production year.
Product handling: Keep left and right units in separate labelled sleeves until the vehicle-side requirement is confirmed.
Wholesale enquiry: Quantity planning is more accurate when the enquiry distinguishes repair demand from left-right kit supply.
2S6A-13K354-AD Fender Light Overview
This vehicle-specific fender light is listed for FORD Focus 2005 at the confirm from original part side-marker position. The photographed lens, rear housing and electrical interface define the supplied configuration.
Separate decorative fender inserts from powered repeaters when preparing the purchase specification. The component occupies a vehicle-specific fender opening and should match both the electrical role and body contour.
Fitment Evidence for the Side Marker
Review the inner flange shape where the lamp meets the metal panel and confirm consistent clearance.
For FORD Focus 2005, confirm the fender aperture, production period and stated side before ordering. The visible lens must align with the surrounding body surface while the concealed supports match the factory opening.
Optical Surface and Connector Review
This repeater extends turn-signal recognition along the vehicle side while completing the fender aperture.
Use a low-current functional test to verify the repeater operates with the selected vehicle-side circuit. Lens colour and reflector texture should also be compared under neutral lighting.
Workshop Installation Guidance
Dry-fit the unit, align the lens with the body surface and secure the retainer without twisting the lamp.
Confirm that projecting clips remain supported and free from carton pressure. After installation, operate the relevant marker or indicator circuit and inspect panel alignment from several angles.
Automotive Component Specifications
| Product type | Fender Light / Side Marker Lamp |
|---|---|
| Primary OE reference | 2S6A-13K354-AD |
| Cross-reference numbers | 2S6A-13K354-AD / 4360568 |
| Internal item code | FD04005-002 |
| Vehicle brand | FORD |
| Vehicle model | Focus |
| Model year | 2005 |
| Installation position | Front fender / side marker opening |
| Side / orientation | Confirm from original part |
Wholesale Supply and Packing
Mixed orders should list left and right quantities separately to reduce picking errors. Each optical face should be isolated from loose hardware, while projecting tabs and connectors require shaped support inside the carton.
Frequently Asked Questions
How should 2S6A-13K354-AD compatibility be confirmed?
Match the OE reference, FORD Focus production year, installation side, connector and hidden mounting geometry.
Can left and right fender lamps be exchanged?
Do not assume interchangeability. Compare the lens angle, clip direction and connector exit for the required side.
What should be checked before installation?
Use the product image to match the visible lens shape together with the concealed fender mounting points. Inspect the rubber seal for compression marks and verify that its mating surface remains clean and even.
What test is recommended after fitting?
After clipping the lamp in place, pull lightly at the housing edge to confirm positive retention.
Which details are needed for a wholesale quote?
Export packing can be planned after the required variant and order volume are confirmed.
Need a quotation? Contact Yongshang Auto with the OE reference, vehicle details, side, quantity and destination.
