29110-1F500 Front Bumper Air Deflector for KIA Sportage 2008
Product: Front Bumper Air Deflector
Primary OE: 29110-1F500
Item code: KA02002-001
Cross-reference numbers:
29110-1F500
Brand: KIA
Model: Sportage
Application reference: 2008 KIA Sportage
Position: Front
Verification: Match 29110-1F500 with the VIN, build date, panel outline and equipment openings before refinishing.
Supply note: State mixed-order requirements, carton marks and pre-shipment photo needs at the quotation stage.
29110-1F500 is documented for wholesale enquiries in which OE traceability and application evidence are required. For 2008 KIA Sportage, Yongshang Auto tracks the requested front bumper air deflector as KA02002-001.
KA02002-001 requires an application-specific review: Sensor holes, washer provisions, tow-eye access and lower-grille geometry may vary even within the same model family. This evidence belongs in the same approval file as the vehicle photographs.
Vehicle Record and Panel Comparison
Fitment guidance for 29110-1F500. If the original cover is missing, provide VIN data and clear photographs of the uncovered vehicle structure. The supplier may need additional evidence before confirming the reference. The purchase team can use the recorded result when confirming the order line.
The front location on 2008 KIA Sportage should be reviewed as follows: Verify whether the request is for the upper cover, lower cover or complete outer lower-bumper component. The purchase description should match the physical section needed by the repair. This evidence belongs in the same approval file as the vehicle photographs.
Product Technical Specifications
| Product type | Front Bumper Air Deflector |
|---|---|
| Primary OE reference | 29110-1F500 |
| Cross-reference numbers | 29110-1F500 |
| Internal item code | KA02002-001 |
| Vehicle brand | KIA |
| Vehicle model | Sportage |
| Model year | 2008 |
| Installation position | Front lower bumper area |
| Applicable vehicle | 2008 KIA Sportage |
Collision-Repair Application
Functional context for 29110-1F500. The outer lower-bumper component contributes to styling and low-speed surface protection, but it is not a substitute for the reinforcement system. Buyers should quote each required assembly part separately. The completed check supports a traceable discussion between buyer and supplier.
Application note for item KA02002-001. A replacement lower-bumper component allows a body shop to rebuild the exterior line without treating the part as structural reinforcement. Reinforcement bars and absorbers remain separate assembly elements. This sequence keeps catalogue selection separate from cosmetic preparation.
Condition Review Before Production Use
Receiving note for carton KA02002-001. Complete a dry installation using the intended retainers and brackets. Review panel gaps and equipment openings before applying primer, paint or adhesive accessories. This sequence keeps catalogue selection separate from cosmetic preparation.
Pre-finish check for 2008 KIA Sportage. Allow the panel to rest in a supported position after unpacking, especially when transport packaging has constrained its shape. Compare the relaxed outline with the original before making a fit judgement. This review is especially useful near model-year or equipment transitions.
Information for Distributors and Importers
A quotation for 29110-1F500 should reflect this guidance: If colours, mouldings or accessories are shown in reference photographs, clarify whether they are included. The listing describes the outer lower-bumper component unless a quotation states otherwise. The buyer can then connect the physical review to the supplier item record.
The 3 square images attached to KA02002-001 support visual review. Identify any barcode, carton mark or language requirement in advance. The agreed label should retain both the buyer reference and the supplier item code. That comparison gives the workshop a clearer basis for a pre-paint decision.
Frequently Asked Questions
How should a buyer confirm OE 29110-1F500?
2008 KIA Sportage is the stated reference for this page. Check the OE reference first and use physical evidence second. Do not approve from an online image or exterior colour alone. The repairer should document the outcome before transferring trim components.
How should a distributor quote reference KA02002-001?
Supplier-code context for this front bumper air deflector. Provide the expected packaging method, label language and pallet requirements. Buyers should also identify any inspection standard that must appear on the order file. Keep KA02002-001 beside 29110-1F500 in the final commercial record.
How can the repairer review the lower-bumper component beyond its front-facing appearance?
Panel-comparison guidance for 2008 KIA Sportage. If the removed lower-bumper part is unavailable, provide VIN details and clear photographs of the uncovered bumper assembly so the supplier can request further evidence. This sequence keeps catalogue selection separate from cosmetic preparation.
What must happen before paint is applied to 29110-1F500?
Finishing guidance for OE 29110-1F500. The body shop should verify the complete assembly interface before any irreversible preparation is carried out. A dated photo record makes the decision easier to review if questions arise later.
Which order data helps Yongshang Auto review 29110-1F500?
Wholesale request for KA02002-001. Keep the OE reference and internal code on every enquiry revision, purchase order and packing confirmation to reduce mix-ups during consolidation. The buyer can then connect the physical review to the supplier item record.
Request a Quote for 29110-1F500
When purchasing for distribution, list the target model years and sales markets. That context helps identify catalogue transitions that deserve additional verification. For Yongshang Auto’s review, connect 29110-1F500 and KA02002-001 with the intended 2008 KIA Sportage, requested quantity and delivery market.
