2825000371 Blower Motor for MITSUBISHI
Primary OE reference: 2825000371
Cross-reference 1: 2825000212
Cross-reference 2: MC140941
Product type: Automotive HVAC Blower Motor
Applicable vehicle: MITSUBISHI
Brand: MITSUBISHI
Model: Confirm by OE reference
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Stable wheel rotation helps distribute air without relying on vehicle speed, making the blower important at idle and in traffic.
Installation guidance: If airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the motor is the only cause.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
2825000371 Automotive Blower Motor Overview
The 2825000371 record is prepared for application-specific HVAC blower replacement and wholesale quotation.
For catalogue item 6215-020, When the climate-control circuit commands 2825000371 airflow, the electric motor rotates the 2825000371 fan wheel inside the HVAC housing. Use 6215-020 when comparing this 2825000371 airflow configuration.
OE Reference and Application
The primary catalogue number is 2825000371. The recorded application is MITSUBISHI. For 6215-020, Verify the complete suffix on the OE number because nearby references can use different plugs or mounting geometry. Record 6215-020 with the approved OE reference.
HVAC Interface and 2825000371 installation
During work on 6215-020, If 2825000371 airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the 2825000371 motor is the only cause. Recheck 6215-020 before the lower trim is closed.
For item 6215-020, confirm that the 2825000371 centrifugal wheel clears its housing and that the 6215-020 connector lock engages without force. After seating 6215-020, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6215-020.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 2825000371 |
| Cross-reference numbers | 2825000212 / MC140941 |
| Vehicle brand | MITSUBISHI |
| Vehicle model | Confirm by OE reference |
| Model year | Confirm by OE reference |
| 2825000371 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6215-020, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6215-020 record remains the picking reference.
For trade item 6215-020, Export buyers should state quantity and delivery country together with any pallet, carton or private-label requirement. Keep 6215-020 on the packing instruction.
Frequently Asked Questions
How should item 6215-020 and blower number 2825000371 be verified?
Match 6215-020 to the complete 2825000371 marking, then compare the 6215-020 plug, terminal count, mounting flange and wheel dimensions with the removed MITSUBISHI unit.
Can 6215-020 have more than one vehicle-side blower configuration?
Yes. MITSUBISHI production changes can affect 6215-020; confirm steering position, climate-control specification and the original 6215-020 geometry before approval.
What circuit checks are useful when 6215-020 does not operate?
For 6215-020, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6215-020 motor again.
Which details should accompany a wholesale request for 6215-020?
Provide item 6215-020, OE 2825000371, the stated application, quantity and destination; add 6215-020 carton or private-label requirements separately.
How can noise be avoided after fitting 6215-020?
Clear debris from the air inlet, check that the 6215-020 wheel turns freely, seat the 6215-020 flange evenly and keep wiring away from the impeller.
Request a quote for 6215-020: Send 2825000371, the 6215-020 application and required quantity for a fitment and supply review.
