282500-1320 Blower Motor for MITSUBISHI
Primary OE reference: 282500-1320
Cross-reference 1: 282500-0252
Cross-reference 2: 8710425640
Cross-reference 3: 8710437150
Cross-reference 4: 87163
Product type: Automotive HVAC Blower Motor
Applicable vehicle: MITSUBISHI
Brand: MITSUBISHI
Model: Confirm by OE reference
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: The blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode.
Installation guidance: Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after installation.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
282500-1320 Automotive Blower Motor Overview
This listing links 282500-1320 with the supplied blower-motor geometry, connector and application information.
For catalogue item 6215-018, Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts. Use 6215-018 when comparing this 282500-1320 airflow configuration.
OE Reference and Application
The primary catalogue number is 282500-1320. The recorded application is MITSUBISHI. For 6215-018, Final approval should combine the OE reference with a direct geometry comparison of the removed part. Record 6215-018 with the approved OE reference.
HVAC Interface and 282500-1320 installation
During work on 6215-018, Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after 282500-1320 installation. Recheck 6215-018 before the lower trim is closed.
For item 6215-018, confirm that the 282500-1320 centrifugal wheel clears its housing and that the 6215-018 connector lock engages without force. After seating 6215-018, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6215-018.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 282500-1320 |
| Cross-reference numbers | 282500-0252 / 8710425640 / 8710437150 / 87163 |
| Vehicle brand | MITSUBISHI |
| Vehicle model | Confirm by OE reference |
| Model year | Confirm by OE reference |
| 282500-1320 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6215-018, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6215-018 record remains the picking reference.
For trade item 6215-018, Wholesale enquiries should identify the reference, quantity, market and packaging requirement so the correct variant is selected. Keep 6215-018 on the packing instruction.
Frequently Asked Questions
How should item 6215-018 and blower number 282500-1320 be verified?
Match 6215-018 to the complete 282500-1320 marking, then compare the 6215-018 plug, terminal count, mounting flange and wheel dimensions with the removed MITSUBISHI unit.
Can 6215-018 have more than one vehicle-side blower configuration?
Yes. MITSUBISHI production changes can affect 6215-018; confirm steering position, climate-control specification and the original 6215-018 geometry before approval.
What circuit checks are useful when 6215-018 does not operate?
For 6215-018, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6215-018 motor again.
Which details should accompany a wholesale request for 6215-018?
Provide item 6215-018, OE 282500-1320, the stated application, quantity and destination; add 6215-018 carton or private-label requirements separately.
How can noise be avoided after fitting 6215-018?
Clear debris from the air inlet, check that the 6215-018 wheel turns freely, seat the 6215-018 flange evenly and keep wiring away from the impeller.
Request a quote for 6215-018: Send 282500-1320, the 6215-018 application and required quantity for a fitment and supply review.
