282500-1230 Blower Motor for PROTON
Primary OE reference: 282500-1230
Cross-reference 1: 116340-5980
Product type: Automotive HVAC Blower Motor
Applicable vehicle: PROTON
Brand: PROTON
Model: Confirm by OE reference
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.
Installation guidance: Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
282500-1230 Automotive Blower Motor Overview
Reference 282500-1230 identifies the cabin-air blower assembly shown for the stated vehicle application.
For catalogue item 6260-031, the 282500-1230 blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6260-031 when comparing this 282500-1230 airflow configuration.
OE Reference and Application
The primary catalogue number is 282500-1230. The recorded application is PROTON. For 6260-031, For mixed-market vehicles, confirm steering position and climate-control specification together with the physical blower dimensions. Record 6260-031 with the approved OE reference.
HVAC Interface and 282500-1230 installation
During work on 6260-031, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6260-031 before the lower trim is closed.
For item 6260-031, confirm that the 282500-1230 centrifugal wheel clears its housing and that the 6260-031 connector lock engages without force. After seating 6260-031, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6260-031.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 282500-1230 |
| Cross-reference numbers | 116340-5980 |
| Vehicle brand | PROTON |
| Vehicle model | Confirm by OE reference |
| Model year | Confirm by OE reference |
| 282500-1230 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6260-031, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6260-031 record remains the picking reference.
For trade item 6260-031, Distributors can request neutral or customized packing after quantities, label content and destination are confirmed. Keep 6260-031 on the packing instruction.
Frequently Asked Questions
How should item 6260-031 and blower number 282500-1230 be verified?
Match 6260-031 to the complete 282500-1230 marking, then compare the 6260-031 plug, terminal count, mounting flange and wheel dimensions with the removed PROTON unit.
Can 6260-031 have more than one vehicle-side blower configuration?
Yes. PROTON production changes can affect 6260-031; confirm steering position, climate-control specification and the original 6260-031 geometry before approval.
What circuit checks are useful when 6260-031 does not operate?
For 6260-031, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6260-031 motor again.
Which details should accompany a wholesale request for 6260-031?
Provide item 6260-031, OE 282500-1230, the stated application, quantity and destination; add 6260-031 carton or private-label requirements separately.
How can noise be avoided after fitting 6260-031?
Clear debris from the air inlet, check that the 6260-031 wheel turns freely, seat the 6260-031 flange evenly and keep wiring away from the impeller.
Request a quote for 6260-031: Send 282500-1230, the 6260-031 application and required quantity for a fitment and supply review.
