282500-1000 Blower Motor for MITSUBISHI
Primary OE reference: 282500-1000
Product type: Automotive HVAC Blower Motor
Applicable vehicle: MITSUBISHI
Brand: MITSUBISHI
Model: Confirm by OE reference
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: The blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode.
Installation guidance: Transfer only serviceable seals or hardware specified for the application and confirm the connector locks without force.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
282500-1000 Automotive Blower Motor Overview
This page records the pictured HVAC blower motor under OE reference 282500-1000 for application-led sourcing.
For catalogue item 6215-019, Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts. Use 6215-019 when comparing this 282500-1000 airflow configuration.
OE Reference and Application
The primary catalogue number is 282500-1000. The recorded application is MITSUBISHI. For 6215-019, Measure the 282500-1000 wheel height and outer diameter, then compare the electrical socket and base contour with the 282500-1000 product photos. Record 6215-019 with the approved OE reference.
HVAC Interface and 282500-1000 installation
During work on 6215-019, Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after 282500-1000 installation. Recheck 6215-019 before the lower trim is closed.
For item 6215-019, confirm that the 282500-1000 centrifugal wheel clears its housing and that the 6215-019 connector lock engages without force. After seating 6215-019, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6215-019.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 282500-1000 |
| Cross-reference numbers | 282500-1000 |
| Vehicle brand | MITSUBISHI |
| Vehicle model | Confirm by OE reference |
| Model year | Confirm by OE reference |
| 282500-1000 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6215-019, Reference labels and image records support traceable picking when visually similar blower motors share a shipment. The 6215-019 record remains the picking reference.
For trade item 6215-019, Each enquiry is easier to verify when it includes the part reference, vehicle context and clear images of the removed blower. Keep 6215-019 on the packing instruction.
Frequently Asked Questions
How should item 6215-019 and blower number 282500-1000 be verified?
Match 6215-019 to the complete 282500-1000 marking, then compare the 6215-019 plug, terminal count, mounting flange and wheel dimensions with the removed MITSUBISHI unit.
Can 6215-019 have more than one vehicle-side blower configuration?
Yes. MITSUBISHI production changes can affect 6215-019; confirm steering position, climate-control specification and the original 6215-019 geometry before approval.
What circuit checks are useful when 6215-019 does not operate?
For 6215-019, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6215-019 motor again.
Which details should accompany a wholesale request for 6215-019?
Provide item 6215-019, OE 282500-1000, the stated application, quantity and destination; add 6215-019 carton or private-label requirements separately.
How can noise be avoided after fitting 6215-019?
Clear debris from the air inlet, check that the 6215-019 wheel turns freely, seat the 6215-019 flange evenly and keep wiring away from the impeller.
Request a quote for 6215-019: Send 282500-1000, the 6215-019 application and required quantity for a fitment and supply review.
