282500-0750 Blower Motor for SUZUKI
Primary OE reference: 282500-0750
Product type: Automotive HVAC Blower Motor
Applicable vehicle: SUZUKI
Brand: SUZUKI
Model: Confirm by OE reference
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Cabin airflow depends on the motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together.
Installation guidance: Inspect the resistor or electronic controller and connector terminals if the original fault involved intermittent speed operation.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
282500-0750 Automotive Blower Motor Overview
The photographed motor-and-wheel unit is indexed by 282500-0750 to support OE-number comparison before purchase.
For catalogue item 6225-028, Cabin 282500-0750 airflow depends on the 282500-0750 motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together. Use 6225-028 when comparing this 282500-0750 airflow configuration.
OE Reference and Application
The primary catalogue number is 282500-0750. The recorded application is SUZUKI. For 6225-028, Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower. Record 6225-028 with the approved OE reference.
HVAC Interface and 282500-0750 installation
During work on 6225-028, Inspect the resistor or electronic controller and connector terminals if the original fault involved intermittent speed operation. Recheck 6225-028 before the lower trim is closed.
For item 6225-028, confirm that the 282500-0750 centrifugal wheel clears its housing and that the 6225-028 connector lock engages without force. After seating 6225-028, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6225-028.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 282500-0750 |
| Cross-reference numbers | 282500-0750 |
| Vehicle brand | SUZUKI |
| Vehicle model | Confirm by OE reference |
| Model year | Confirm by OE reference |
| 282500-0750 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6225-028, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6225-028 record remains the picking reference.
For trade item 6225-028, Wholesale enquiries should identify the reference, quantity, market and packaging requirement so the correct variant is selected. Keep 6225-028 on the packing instruction.
Frequently Asked Questions
How should item 6225-028 and blower number 282500-0750 be verified?
Match 6225-028 to the complete 282500-0750 marking, then compare the 6225-028 plug, terminal count, mounting flange and wheel dimensions with the removed SUZUKI unit.
Can 6225-028 have more than one vehicle-side blower configuration?
Yes. SUZUKI production changes can affect 6225-028; confirm steering position, climate-control specification and the original 6225-028 geometry before approval.
What circuit checks are useful when 6225-028 does not operate?
For 6225-028, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6225-028 motor again.
Which details should accompany a wholesale request for 6225-028?
Provide item 6225-028, OE 282500-0750, the stated application, quantity and destination; add 6225-028 carton or private-label requirements separately.
How can noise be avoided after fitting 6225-028?
Clear debris from the air inlet, check that the 6225-028 wheel turns freely, seat the 6225-028 flange evenly and keep wiring away from the impeller.
Request a quote for 6225-028: Send 282500-0750, the 6225-028 application and required quantity for a fitment and supply review.
