27236AV600 Blower Motor for NISSAN X-Trail
Primary OE reference: 27236AV600
Cross-reference 1: 27200AV603
Cross-reference 2: 27200AV600
Product type: Automotive HVAC Blower Motor
Applicable vehicle: NISSAN X-Trail
Brand: NISSAN
Model: X-Trail
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.
Installation guidance: Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
27236AV600 Automotive Blower Motor Overview
Reference 27236AV600 identifies the cabin-air blower assembly shown for the stated vehicle application.
For catalogue item 6205-040, the 27236AV600 blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6205-040 when comparing this 27236AV600 airflow configuration.
OE Reference and Application
The primary catalogue number is 27236AV600. The recorded application is NISSAN X-Trail. For 6205-040, For mixed-market vehicles, confirm steering position and climate-control specification together with the physical blower dimensions. Record 6205-040 with the approved OE reference.
HVAC Interface and 27236AV600 installation
During work on 6205-040, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6205-040 before the lower trim is closed.
For item 6205-040, confirm that the 27236AV600 centrifugal wheel clears its housing and that the 6205-040 connector lock engages without force. After seating 6205-040, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6205-040.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 27236AV600 |
| Cross-reference numbers | 27200AV603 / 27200AV600 |
| Vehicle brand | NISSAN |
| Vehicle model | X-Trail |
| Model year | Confirm by OE reference |
| 27236AV600 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6205-040, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6205-040 record remains the picking reference.
For trade item 6205-040, Wholesale enquiries should identify the reference, quantity, market and packaging requirement so the correct variant is selected. Keep 6205-040 on the packing instruction.
Frequently Asked Questions
How should item 6205-040 and blower number 27236AV600 be verified?
Match 6205-040 to the complete 27236AV600 marking, then compare the 6205-040 plug, terminal count, mounting flange and wheel dimensions with the removed NISSAN unit.
Can 6205-040 have more than one vehicle-side blower configuration?
Yes. NISSAN production changes can affect 6205-040; confirm steering position, climate-control specification and the original 6205-040 geometry before approval.
What circuit checks are useful when 6205-040 does not operate?
For 6205-040, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6205-040 motor again.
Which details should accompany a wholesale request for 6205-040?
Provide item 6205-040, OE 27236AV600, the stated application, quantity and destination; add 6205-040 carton or private-label requirements separately.
How can noise be avoided after fitting 6205-040?
Clear debris from the air inlet, check that the 6205-040 wheel turns freely, seat the 6205-040 flange evenly and keep wiring away from the impeller.
Request a quote for 6205-040: Send 27236AV600, the 6205-040 application and required quantity for a fitment and supply review.
