27230-1E400 Blower Motor for NISSAN Patrol
Primary OE reference: 27230-1E400
Product type: Automotive HVAC Blower Motor
Applicable vehicle: NISSAN Patrol
Brand: NISSAN
Model: Patrol
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.
Installation guidance: Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
27230-1E400 Automotive Blower Motor Overview
Reference 27230-1E400 identifies the cabin-air blower assembly shown for the stated vehicle application.
For catalogue item 6205-031, the 27230-1E400 blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6205-031 when comparing this 27230-1E400 airflow configuration.
OE Reference and Application
The primary catalogue number is 27230-1E400. The recorded application is NISSAN Patrol. For 6205-031, For mixed-market vehicles, confirm steering position and climate-control specification together with the physical blower dimensions. Record 6205-031 with the approved OE reference.
HVAC Interface and 27230-1E400 installation
During work on 6205-031, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6205-031 before the lower trim is closed.
For item 6205-031, confirm that the 27230-1E400 centrifugal wheel clears its housing and that the 6205-031 connector lock engages without force. After seating 6205-031, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6205-031.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 27230-1E400 |
| Cross-reference numbers | 27230-1E400 |
| Vehicle brand | NISSAN |
| Vehicle model | Patrol |
| Model year | Confirm by OE reference |
| 27230-1E400 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6205-031, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6205-031 record remains the picking reference.
For trade item 6205-031, Distributors can request neutral or customized packing after quantities, label content and destination are confirmed. Keep 6205-031 on the packing instruction.
Frequently Asked Questions
How should item 6205-031 and blower number 27230-1E400 be verified?
Match 6205-031 to the complete 27230-1E400 marking, then compare the 6205-031 plug, terminal count, mounting flange and wheel dimensions with the removed NISSAN unit.
Can 6205-031 have more than one vehicle-side blower configuration?
Yes. NISSAN production changes can affect 6205-031; confirm steering position, climate-control specification and the original 6205-031 geometry before approval.
What circuit checks are useful when 6205-031 does not operate?
For 6205-031, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6205-031 motor again.
Which details should accompany a wholesale request for 6205-031?
Provide item 6205-031, OE 27230-1E400, the stated application, quantity and destination; add 6205-031 carton or private-label requirements separately.
How can noise be avoided after fitting 6205-031?
Clear debris from the air inlet, check that the 6205-031 wheel turns freely, seat the 6205-031 flange evenly and keep wiring away from the impeller.
Request a quote for 6205-031: Send 27230-1E400, the 6205-031 application and required quantity for a fitment and supply review.
