27226EB71B Blower Motor for NISSAN Navara
Primary OE reference: 27226EB71B
Product type: Automotive HVAC Blower Motor
Applicable vehicle: NISSAN Navara
Brand: NISSAN
Model: Navara
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.
Installation guidance: Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
27226EB71B Automotive Blower Motor Overview
Reference 27226EB71B identifies the cabin-air blower assembly shown for the stated vehicle application.
For catalogue item 6205-088, the 27226EB71B blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6205-088 when comparing this 27226EB71B airflow configuration.
OE Reference and Application
The primary catalogue number is 27226EB71B. The recorded application is NISSAN Navara. For 6205-088, For mixed-market vehicles, confirm steering position and climate-control specification together with the physical blower dimensions. Record 6205-088 with the approved OE reference.
HVAC Interface and 27226EB71B installation
During work on 6205-088, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6205-088 before the lower trim is closed.
For item 6205-088, confirm that the 27226EB71B centrifugal wheel clears its housing and that the 6205-088 connector lock engages without force. After seating 6205-088, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6205-088.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 27226EB71B |
| Cross-reference numbers | 27226EB71B |
| Vehicle brand | NISSAN |
| Vehicle model | Navara |
| Model year | Confirm by OE reference |
| 27226EB71B installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6205-088, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6205-088 record remains the picking reference.
For trade item 6205-088, Export buyers should state quantity and delivery country together with any pallet, carton or private-label requirement. Keep 6205-088 on the packing instruction.
Frequently Asked Questions
How should item 6205-088 and blower number 27226EB71B be verified?
Match 6205-088 to the complete 27226EB71B marking, then compare the 6205-088 plug, terminal count, mounting flange and wheel dimensions with the removed NISSAN unit.
Can 6205-088 have more than one vehicle-side blower configuration?
Yes. NISSAN production changes can affect 6205-088; confirm steering position, climate-control specification and the original 6205-088 geometry before approval.
What circuit checks are useful when 6205-088 does not operate?
For 6205-088, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6205-088 motor again.
Which details should accompany a wholesale request for 6205-088?
Provide item 6205-088, OE 27226EB71B, the stated application, quantity and destination; add 6205-088 carton or private-label requirements separately.
How can noise be avoided after fitting 6205-088?
Clear debris from the air inlet, check that the 6205-088 wheel turns freely, seat the 6205-088 flange evenly and keep wiring away from the impeller.
Request a quote for 6205-088: Send 27226EB71B, the 6205-088 application and required quantity for a fitment and supply review.
