272268M500-A070 Blower Motor for NISSAN Sunny 2005
Primary OE reference: 272268M500-A070
Cross-reference 1: 272268M500-A075
Cross-reference 2: 27226-8M500
Product type: Automotive HVAC Blower Motor
Applicable vehicle: NISSAN Sunny 2005
Brand: NISSAN
Model: Sunny
Vehicle year: 2005
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.
Installation guidance: Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
272268M500-A070 Automotive Blower Motor Overview
Reference 272268M500-A070 identifies the cabin-air blower assembly shown for the stated vehicle application.
For catalogue item 6205-005, the 272268M500-A070 blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6205-005 when comparing this 272268M500-A070 airflow configuration.
OE Reference and Application
The primary catalogue number is 272268M500-A070. The recorded application is NISSAN Sunny 2005. For 6205-005, For mixed-market vehicles, confirm steering position and climate-control specification together with the physical blower dimensions. Record 6205-005 with the approved OE reference.
HVAC Interface and 272268M500-A070 installation
During work on 6205-005, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6205-005 before the lower trim is closed.
For item 6205-005, confirm that the 272268M500-A070 centrifugal wheel clears its housing and that the 6205-005 connector lock engages without force. After seating 6205-005, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6205-005.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 272268M500-A070 |
| Cross-reference numbers | 272268M500-A075 / 27226-8M500 |
| Vehicle brand | NISSAN |
| Vehicle model | Sunny |
| Model year | 2005 |
| 272268M500-A070 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6205-005, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6205-005 record remains the picking reference.
For trade item 6205-005, Wholesale enquiries should identify the reference, quantity, market and packaging requirement so the correct variant is selected. Keep 6205-005 on the packing instruction.
Frequently Asked Questions
How should item 6205-005 and blower number 272268M500-A070 be verified?
Match 6205-005 to the complete 272268M500-A070 marking, then compare the 6205-005 plug, terminal count, mounting flange and wheel dimensions with the removed NISSAN unit.
Can 6205-005 have more than one vehicle-side blower configuration?
Yes. NISSAN production changes can affect 6205-005; confirm steering position, climate-control specification and the original 6205-005 geometry before approval.
What circuit checks are useful when 6205-005 does not operate?
For 6205-005, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6205-005 motor again.
Which details should accompany a wholesale request for 6205-005?
Provide item 6205-005, OE 272268M500-A070, the stated application, quantity and destination; add 6205-005 carton or private-label requirements separately.
How can noise be avoided after fitting 6205-005?
Clear debris from the air inlet, check that the 6205-005 wheel turns freely, seat the 6205-005 flange evenly and keep wiring away from the impeller.
Request a quote for 6205-005: Send 272268M500-A070, the 6205-005 application and required quantity for a fitment and supply review.
