272268M200 Blower Motor for NISSAN Almera
Primary OE reference: 272268M200
Cross-reference 1: 27236BN010
Cross-reference 2: 27226BN000
Cross-reference 3: 27230AV000
Cross-reference 4: 272308M200
Product type: Automotive HVAC Blower Motor
Applicable vehicle: NISSAN Almera
Brand: NISSAN
Model: Almera
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Stable wheel rotation helps distribute air without relying on vehicle speed, making the blower important at idle and in traffic.
Installation guidance: If airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the motor is the only cause.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
272268M200 Automotive Blower Motor Overview
The 272268M200 record is prepared for application-specific HVAC blower replacement and wholesale quotation.
For catalogue item 6205-093, When the climate-control circuit commands 272268M200 airflow, the electric motor rotates the 272268M200 fan wheel inside the HVAC housing. Use 6205-093 when comparing this 272268M200 airflow configuration.
OE Reference and Application
The primary catalogue number is 272268M200. The recorded application is NISSAN Almera. For 6205-093, Verify the complete suffix on the OE number because nearby references can use different plugs or mounting geometry. Record 6205-093 with the approved OE reference.
HVAC Interface and 272268M200 installation
During work on 6205-093, If 272268M200 airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the 272268M200 motor is the only cause. Recheck 6205-093 before the lower trim is closed.
For item 6205-093, confirm that the 272268M200 centrifugal wheel clears its housing and that the 6205-093 connector lock engages without force. After seating 6205-093, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6205-093.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 272268M200 |
| Cross-reference numbers | 27236BN010 / 27226BN000 / 27230AV000 / 272308M200 |
| Vehicle brand | NISSAN |
| Vehicle model | Almera |
| Model year | Confirm by OE reference |
| 272268M200 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6205-093, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6205-093 record remains the picking reference.
For trade item 6205-093, For repeat orders, quote the same SKU and OE reference while noting any change in vehicle market or steering position. Keep 6205-093 on the packing instruction.
Frequently Asked Questions
How should item 6205-093 and blower number 272268M200 be verified?
Match 6205-093 to the complete 272268M200 marking, then compare the 6205-093 plug, terminal count, mounting flange and wheel dimensions with the removed NISSAN unit.
Can 6205-093 have more than one vehicle-side blower configuration?
Yes. NISSAN production changes can affect 6205-093; confirm steering position, climate-control specification and the original 6205-093 geometry before approval.
What circuit checks are useful when 6205-093 does not operate?
For 6205-093, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6205-093 motor again.
Which details should accompany a wholesale request for 6205-093?
Provide item 6205-093, OE 272268M200, the stated application, quantity and destination; add 6205-093 carton or private-label requirements separately.
How can noise be avoided after fitting 6205-093?
Clear debris from the air inlet, check that the 6205-093 wheel turns freely, seat the 6205-093 flange evenly and keep wiring away from the impeller.
Request a quote for 6205-093: Send 272268M200, the 6205-093 application and required quantity for a fitment and supply review.
