272263A129 Blower Motor for NISSAN Tiida 2011-2016
Primary OE reference: 272263A129
Cross-reference 1: 272263SG0A
Cross-reference 2: 272263DF0A
Cross-reference 3: 272263DF0A-A129
Product type: Automotive HVAC Blower Motor
Applicable vehicle: NISSAN Tiida 2011-2016
Brand: NISSAN
Model: Tiida
Vehicle year: 2011-2016
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Cabin airflow depends on the motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together.
Installation guidance: Inspect the resistor or electronic controller and connector terminals if the original fault involved intermittent speed operation.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
272263A129 Automotive Blower Motor Overview
The photographed motor-and-wheel unit is indexed by 272263A129 to support OE-number comparison before purchase.
For catalogue item 6205-004, Cabin 272263A129 airflow depends on the 272263A129 motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together. Use 6205-004 when comparing this 272263A129 airflow configuration.
OE Reference and Application
The primary catalogue number is 272263A129. The recorded application is NISSAN Tiida 2011-2016. For 6205-004, Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower. Record 6205-004 with the approved OE reference.
HVAC Interface and 272263A129 installation
During work on 6205-004, Inspect the resistor or electronic controller and connector terminals if the original fault involved intermittent speed operation. Recheck 6205-004 before the lower trim is closed.
For item 6205-004, confirm that the 272263A129 centrifugal wheel clears its housing and that the 6205-004 connector lock engages without force. After seating 6205-004, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6205-004.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 272263A129 |
| Cross-reference numbers | 272263SG0A / 272263DF0A / 272263DF0A-A129 |
| Vehicle brand | NISSAN |
| Vehicle model | Tiida |
| Model year | 2011-2016 |
| 272263A129 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6205-004, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6205-004 record remains the picking reference.
For trade item 6205-004, Export buyers should state quantity and delivery country together with any pallet, carton or private-label requirement. Keep 6205-004 on the packing instruction.
Frequently Asked Questions
How should item 6205-004 and blower number 272263A129 be verified?
Match 6205-004 to the complete 272263A129 marking, then compare the 6205-004 plug, terminal count, mounting flange and wheel dimensions with the removed NISSAN unit.
Can 6205-004 have more than one vehicle-side blower configuration?
Yes. NISSAN production changes can affect 6205-004; confirm steering position, climate-control specification and the original 6205-004 geometry before approval.
What circuit checks are useful when 6205-004 does not operate?
For 6205-004, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6205-004 motor again.
Which details should accompany a wholesale request for 6205-004?
Provide item 6205-004, OE 272263A129, the stated application, quantity and destination; add 6205-004 carton or private-label requirements separately.
How can noise be avoided after fitting 6205-004?
Clear debris from the air inlet, check that the 6205-004 wheel turns freely, seat the 6205-004 flange evenly and keep wiring away from the impeller.
Request a quote for 6205-004: Send 272263A129, the 6205-004 application and required quantity for a fitment and supply review.
