272261KA3A Blower Motor for NISSAN Juke 2010-2020
Primary OE reference: 272261KA3A
Cross-reference 1: 272263SB0A
Cross-reference 2: 273SY1KA0A
Cross-reference 3: 272261KA0A
Cross-reference 4: STF-2077
Cross-reference 5: XBBM0139
Product type: Automotive HVAC Blower Motor
Applicable vehicle: NISSAN Juke 2010-2020
Brand: NISSAN
Model: Juke
Vehicle year: 2010-2020
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Stable wheel rotation helps distribute air without relying on vehicle speed, making the blower important at idle and in traffic.
Installation guidance: Seat the mounting flange evenly, avoid impact to the plastic impeller, and listen for rubbing or imbalance during the first test.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
272261KA3A Automotive Blower Motor Overview
YoonShan catalogues 272261KA3A as an HVAC 272261KA3A airflow component for workshops, distributors and export buyers.
For catalogue item 6205-030, When the climate-control circuit commands 272261KA3A airflow, the electric motor rotates the 272261KA3A fan wheel inside the HVAC housing. Use 6205-030 when comparing this 272261KA3A airflow configuration.
OE Reference and Application
The primary catalogue number is 272261KA3A. The recorded application is NISSAN Juke 2010-2020. For 6205-030, Compare the OE label, plug key, terminal count, mounting flange and fan-wheel diameter with the removed NISSAN unit. Record 6205-030 with the approved OE reference.
HVAC Interface and 272261KA3A installation
During work on 6205-030, If 272261KA3A airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the 272261KA3A motor is the only cause. Recheck 6205-030 before the lower trim is closed.
For item 6205-030, confirm that the 272261KA3A centrifugal wheel clears its housing and that the 6205-030 connector lock engages without force. After seating 6205-030, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6205-030.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 272261KA3A |
| Cross-reference numbers | 272263SB0A / 273SY1KA0A / 272261KA0A / STF-2077 / XBBM0139 |
| Vehicle brand | NISSAN |
| Vehicle model | Juke |
| Model year | 2010-2020 |
| 272261KA3A installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6205-030, Packing preparation accounts for the 272261KA3A motor weight and wheel shape to reduce movement inside the carton. The 6205-030 record remains the picking reference.
For trade item 6205-030, To reduce selection errors, include the original-part photograph and connector view with the purchase list. Keep 6205-030 on the packing instruction.
Frequently Asked Questions
How should item 6205-030 and blower number 272261KA3A be verified?
Match 6205-030 to the complete 272261KA3A marking, then compare the 6205-030 plug, terminal count, mounting flange and wheel dimensions with the removed NISSAN unit.
Can 6205-030 have more than one vehicle-side blower configuration?
Yes. NISSAN production changes can affect 6205-030; confirm steering position, climate-control specification and the original 6205-030 geometry before approval.
What circuit checks are useful when 6205-030 does not operate?
For 6205-030, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6205-030 motor again.
Which details should accompany a wholesale request for 6205-030?
Provide item 6205-030, OE 272261KA3A, the stated application, quantity and destination; add 6205-030 carton or private-label requirements separately.
How can noise be avoided after fitting 6205-030?
Clear debris from the air inlet, check that the 6205-030 wheel turns freely, seat the 6205-030 flange evenly and keep wiring away from the impeller.
Request a quote for 6205-030: Send 272261KA3A, the 6205-030 application and required quantity for a fitment and supply review.
