27226-ZM70A Blower Motor for NISSAN Quest
Primary OE reference: 27226-ZM70A
Cross-reference 1: 272265Z000
Cross-reference 2: PM4086
Cross-reference 3: 75054
Cross-reference 4: 2311917
Product type: Automotive HVAC Blower Motor
Applicable vehicle: NISSAN Quest
Brand: NISSAN
Model: Quest
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Stable wheel rotation helps distribute air without relying on vehicle speed, making the blower important at idle and in traffic.
Installation guidance: Seat the mounting flange evenly, avoid impact to the plastic impeller, and listen for rubbing or imbalance during the first test.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
27226-ZM70A Automotive Blower Motor Overview
YoonShan catalogues 27226-ZM70A as an HVAC 27226-ZM70A airflow component for workshops, distributors and export buyers.
For catalogue item 6205-123, When the climate-control circuit commands 27226-ZM70A airflow, the electric motor rotates the 27226-ZM70A fan wheel inside the HVAC housing. Use 6205-123 when comparing this 27226-ZM70A airflow configuration.
OE Reference and Application
The primary catalogue number is 27226-ZM70A. The recorded application is NISSAN Quest. For 6205-123, Compare the OE label, plug key, terminal count, mounting flange and fan-wheel diameter with the removed NISSAN unit. Record 6205-123 with the approved OE reference.
HVAC Interface and 27226-ZM70A installation
During work on 6205-123, If 27226-ZM70A airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the 27226-ZM70A motor is the only cause. Recheck 6205-123 before the lower trim is closed.
For item 6205-123, confirm that the 27226-ZM70A centrifugal wheel clears its housing and that the 6205-123 connector lock engages without force. After seating 6205-123, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6205-123.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 27226-ZM70A |
| Cross-reference numbers | 272265Z000 / PM4086 / 75054 / 2311917 |
| Vehicle brand | NISSAN |
| Vehicle model | Quest |
| Model year | Confirm by OE reference |
| 27226-ZM70A installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6205-123, Reference labels and image records support traceable picking when visually similar blower motors share a shipment. The 6205-123 record remains the picking reference.
For trade item 6205-123, Each enquiry is easier to verify when it includes the part reference, vehicle context and clear images of the removed blower. Keep 6205-123 on the packing instruction.
Frequently Asked Questions
How should item 6205-123 and blower number 27226-ZM70A be verified?
Match 6205-123 to the complete 27226-ZM70A marking, then compare the 6205-123 plug, terminal count, mounting flange and wheel dimensions with the removed NISSAN unit.
Can 6205-123 have more than one vehicle-side blower configuration?
Yes. NISSAN production changes can affect 6205-123; confirm steering position, climate-control specification and the original 6205-123 geometry before approval.
What circuit checks are useful when 6205-123 does not operate?
For 6205-123, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6205-123 motor again.
Which details should accompany a wholesale request for 6205-123?
Provide item 6205-123, OE 27226-ZM70A, the stated application, quantity and destination; add 6205-123 carton or private-label requirements separately.
How can noise be avoided after fitting 6205-123?
Clear debris from the air inlet, check that the 6205-123 wheel turns freely, seat the 6205-123 flange evenly and keep wiring away from the impeller.
Request a quote for 6205-123: Send 27226-ZM70A, the 6205-123 application and required quantity for a fitment and supply review.
