2722001J01 Blower Motor for NISSAN Safari
Primary OE reference: 2722001J01
Product type: Automotive HVAC Blower Motor
Applicable vehicle: NISSAN Safari
Brand: NISSAN
Model: Safari
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: When the climate-control circuit commands airflow, the electric motor rotates the fan wheel inside the HVAC housing.
Installation guidance: After installation, operate low through high speed and confirm airflow reaches the selected vents without abnormal vibration.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
2722001J01 Automotive Blower Motor Overview
This product entry documents the 2722001J01 blower unit with practical identification and 2722001J01 installation checkpoints.
For catalogue item 6205-085, Stable wheel rotation helps distribute air without relying on vehicle speed, making the 2722001J01 blower important at idle and in traffic. Use 6205-085 when comparing this 2722001J01 airflow configuration.
OE Reference and Application
The primary catalogue number is 2722001J01. The recorded application is NISSAN Safari. For 6205-085, Confirm connector orientation, wheel depth, housing diameter and screw pattern before approving the order. Record 6205-085 with the approved OE reference.
HVAC Interface and 2722001J01 installation
During work on 6205-085, After 2722001J01 installation, operate low through high speed and confirm 2722001J01 airflow reaches the selected vents without abnormal vibration. Recheck 6205-085 before the lower trim is closed.
For item 6205-085, confirm that the 2722001J01 centrifugal wheel clears its housing and that the 6205-085 connector lock engages without force. After seating 6205-085, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6205-085.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 2722001J01 |
| Cross-reference numbers | 2722001J01 |
| Vehicle brand | NISSAN |
| Vehicle model | Safari |
| Model year | Confirm by OE reference |
| 2722001J01 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6205-085, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6205-085 record remains the picking reference.
For trade item 6205-085, Wholesale enquiries should identify the reference, quantity, market and packaging requirement so the correct variant is selected. Keep 6205-085 on the packing instruction.
Frequently Asked Questions
How should item 6205-085 and blower number 2722001J01 be verified?
Match 6205-085 to the complete 2722001J01 marking, then compare the 6205-085 plug, terminal count, mounting flange and wheel dimensions with the removed NISSAN unit.
Can 6205-085 have more than one vehicle-side blower configuration?
Yes. NISSAN production changes can affect 6205-085; confirm steering position, climate-control specification and the original 6205-085 geometry before approval.
What circuit checks are useful when 6205-085 does not operate?
For 6205-085, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6205-085 motor again.
Which details should accompany a wholesale request for 6205-085?
Provide item 6205-085, OE 2722001J01, the stated application, quantity and destination; add 6205-085 carton or private-label requirements separately.
How can noise be avoided after fitting 6205-085?
Clear debris from the air inlet, check that the 6205-085 wheel turns freely, seat the 6205-085 flange evenly and keep wiring away from the impeller.
Request a quote for 6205-085: Send 2722001J01, the 6205-085 application and required quantity for a fitment and supply review.
