27220-VJ200 Blower Motor for NISSAN Navara
Primary OE reference: 27220-VJ200
Product type: Automotive HVAC Blower Motor
Applicable vehicle: NISSAN Navara
Brand: NISSAN
Model: Navara
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: When the climate-control circuit commands airflow, the electric motor rotates the fan wheel inside the HVAC housing.
Installation guidance: After installation, operate low through high speed and confirm airflow reaches the selected vents without abnormal vibration.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
27220-VJ200 Automotive Blower Motor Overview
This product entry documents the 27220-VJ200 blower unit with practical identification and 27220-VJ200 installation checkpoints.
For catalogue item 6205-079, Stable wheel rotation helps distribute air without relying on vehicle speed, making the 27220-VJ200 blower important at idle and in traffic. Use 6205-079 when comparing this 27220-VJ200 airflow configuration.
OE Reference and Application
The primary catalogue number is 27220-VJ200. The recorded application is NISSAN Navara. For 6205-079, Confirm connector orientation, wheel depth, housing diameter and screw pattern before approving the order. Record 6205-079 with the approved OE reference.
HVAC Interface and 27220-VJ200 installation
During work on 6205-079, After 27220-VJ200 installation, operate low through high speed and confirm 27220-VJ200 airflow reaches the selected vents without abnormal vibration. Recheck 6205-079 before the lower trim is closed.
For item 6205-079, confirm that the 27220-VJ200 centrifugal wheel clears its housing and that the 6205-079 connector lock engages without force. After seating 6205-079, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6205-079.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 27220-VJ200 |
| Cross-reference numbers | 27220-VJ200 |
| Vehicle brand | NISSAN |
| Vehicle model | Navara |
| Model year | Confirm by OE reference |
| 27220-VJ200 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6205-079, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6205-079 record remains the picking reference.
For trade item 6205-079, Wholesale enquiries should identify the reference, quantity, market and packaging requirement so the correct variant is selected. Keep 6205-079 on the packing instruction.
Frequently Asked Questions
How should item 6205-079 and blower number 27220-VJ200 be verified?
Match 6205-079 to the complete 27220-VJ200 marking, then compare the 6205-079 plug, terminal count, mounting flange and wheel dimensions with the removed NISSAN unit.
Can 6205-079 have more than one vehicle-side blower configuration?
Yes. NISSAN production changes can affect 6205-079; confirm steering position, climate-control specification and the original 6205-079 geometry before approval.
What circuit checks are useful when 6205-079 does not operate?
For 6205-079, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6205-079 motor again.
Which details should accompany a wholesale request for 6205-079?
Provide item 6205-079, OE 27220-VJ200, the stated application, quantity and destination; add 6205-079 carton or private-label requirements separately.
How can noise be avoided after fitting 6205-079?
Clear debris from the air inlet, check that the 6205-079 wheel turns freely, seat the 6205-079 flange evenly and keep wiring away from the impeller.
Request a quote for 6205-079: Send 27220-VJ200, the 6205-079 application and required quantity for a fitment and supply review.
