27220-JK01A Blower Motor for NISSAN Patrol
Primary OE reference: 27220-JK01A
Cross-reference 1: 27225AL500
Cross-reference 2: 27220CB000
Cross-reference 3: 3K01304Y24
Cross-reference 4: 27220JK00C
Cross-reference 5: 272204JA0A
Cross-reference 6: 27200-JA000
Cross-reference 7: 27220JK00D
Cross-reference 8: 27220JK00A
Product type: Automotive HVAC Blower Motor
Applicable vehicle: NISSAN Patrol
Brand: NISSAN
Model: Patrol
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.
Installation guidance: Disconnect electrical power as required, remove trim without forcing clips, and trial-fit the blower before final tightening.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
27220-JK01A Automotive Blower Motor Overview
Buyers comparing an interior fan motor can use 27220-JK01A together with the 27220-JK01A product images and vehicle data on this page.
For catalogue item 6205-012, the 27220-JK01A blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6205-012 when comparing this 27220-JK01A airflow configuration.
OE Reference and Application
The primary catalogue number is 27220-JK01A. The recorded application is NISSAN Patrol. For 6205-012, Use the original motor number and clear front/rear photographs to distinguish similar left-hand-drive and right-hand-drive versions. Record 6205-012 with the approved OE reference.
HVAC Interface and 27220-JK01A installation
During work on 6205-012, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6205-012 before the lower trim is closed.
For item 6205-012, confirm that the 27220-JK01A centrifugal wheel clears its housing and that the 6205-012 connector lock engages without force. After seating 6205-012, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6205-012.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 27220-JK01A |
| Cross-reference numbers | 27225AL500 / 27220CB000 / 3K01304Y24 / 27220JK00C / 272204JA0A / 27200-JA000 / 27220JK00D / 27220JK00A |
| Vehicle brand | NISSAN |
| Vehicle model | Patrol |
| Model year | Confirm by OE reference |
| 27220-JK01A installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6205-012, Packing preparation accounts for the 27220-JK01A motor weight and wheel shape to reduce movement inside the carton. The 6205-012 record remains the picking reference.
For trade item 6205-012, To reduce selection errors, include the original-part photograph and connector view with the purchase list. Keep 6205-012 on the packing instruction.
Frequently Asked Questions
How should item 6205-012 and blower number 27220-JK01A be verified?
Match 6205-012 to the complete 27220-JK01A marking, then compare the 6205-012 plug, terminal count, mounting flange and wheel dimensions with the removed NISSAN unit.
Can 6205-012 have more than one vehicle-side blower configuration?
Yes. NISSAN production changes can affect 6205-012; confirm steering position, climate-control specification and the original 6205-012 geometry before approval.
What circuit checks are useful when 6205-012 does not operate?
For 6205-012, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6205-012 motor again.
Which details should accompany a wholesale request for 6205-012?
Provide item 6205-012, OE 27220-JK01A, the stated application, quantity and destination; add 6205-012 carton or private-label requirements separately.
How can noise be avoided after fitting 6205-012?
Clear debris from the air inlet, check that the 6205-012 wheel turns freely, seat the 6205-012 flange evenly and keep wiring away from the impeller.
Request a quote for 6205-012: Send 27220-JK01A, the 6205-012 application and required quantity for a fitment and supply review.
