272008J100 Blower Motor for NISSAN Altima
Primary OE reference: 272008J100
Cross-reference 1: 27225-8J100
Cross-reference 2: 27230-8J000
Cross-reference 3: TYC700086
Cross-reference 4: 75814
Cross-reference 5: PM9251
Cross-reference 6: BM00164C
Product type: Automotive HVAC Blower Motor
Applicable vehicle: NISSAN Altima
Brand: NISSAN
Model: Altima
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Stable wheel rotation helps distribute air without relying on vehicle speed, making the blower important at idle and in traffic.
Installation guidance: If airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the motor is the only cause.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
272008J100 Automotive Blower Motor Overview
The 272008J100 record is prepared for application-specific HVAC blower replacement and wholesale quotation.
For catalogue item 6205-043, When the climate-control circuit commands 272008J100 airflow, the electric motor rotates the 272008J100 fan wheel inside the HVAC housing. Use 6205-043 when comparing this 272008J100 airflow configuration.
OE Reference and Application
The primary catalogue number is 272008J100. The recorded application is NISSAN Altima. For 6205-043, Verify the complete suffix on the OE number because nearby references can use different plugs or mounting geometry. Record 6205-043 with the approved OE reference.
HVAC Interface and 272008J100 installation
During work on 6205-043, If 272008J100 airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the 272008J100 motor is the only cause. Recheck 6205-043 before the lower trim is closed.
For item 6205-043, confirm that the 272008J100 centrifugal wheel clears its housing and that the 6205-043 connector lock engages without force. After seating 6205-043, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6205-043.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 272008J100 |
| Cross-reference numbers | 27225-8J100 / 27230-8J000 / TYC700086 / 75814 / PM9251 / BM00164C |
| Vehicle brand | NISSAN |
| Vehicle model | Altima |
| Model year | Confirm by OE reference |
| 272008J100 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6205-043, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6205-043 record remains the picking reference.
For trade item 6205-043, Export buyers should state quantity and delivery country together with any pallet, carton or private-label requirement. Keep 6205-043 on the packing instruction.
Frequently Asked Questions
How should item 6205-043 and blower number 272008J100 be verified?
Match 6205-043 to the complete 272008J100 marking, then compare the 6205-043 plug, terminal count, mounting flange and wheel dimensions with the removed NISSAN unit.
Can 6205-043 have more than one vehicle-side blower configuration?
Yes. NISSAN production changes can affect 6205-043; confirm steering position, climate-control specification and the original 6205-043 geometry before approval.
What circuit checks are useful when 6205-043 does not operate?
For 6205-043, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6205-043 motor again.
Which details should accompany a wholesale request for 6205-043?
Provide item 6205-043, OE 272008J100, the stated application, quantity and destination; add 6205-043 carton or private-label requirements separately.
How can noise be avoided after fitting 6205-043?
Clear debris from the air inlet, check that the 6205-043 wheel turns freely, seat the 6205-043 flange evenly and keep wiring away from the impeller.
Request a quote for 6205-043: Send 272008J100, the 6205-043 application and required quantity for a fitment and supply review.
