27200-4M460 Blower Motor for NISSAN Sunny
Primary OE reference: 27200-4M460
Cross-reference 1: 27200-4M410
Cross-reference 2: 27200-4M400
Cross-reference 3: 27200-4M461
Product type: Automotive HVAC Blower Motor
Applicable vehicle: NISSAN Sunny
Brand: NISSAN
Model: Sunny
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Stable wheel rotation helps distribute air without relying on vehicle speed, making the blower important at idle and in traffic.
Installation guidance: If airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the motor is the only cause.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
27200-4M460 Automotive Blower Motor Overview
The 27200-4M460 record is prepared for application-specific HVAC blower replacement and wholesale quotation.
For catalogue item 6205-026, When the climate-control circuit commands 27200-4M460 airflow, the electric motor rotates the 27200-4M460 fan wheel inside the HVAC housing. Use 6205-026 when comparing this 27200-4M460 airflow configuration.
OE Reference and Application
The primary catalogue number is 27200-4M460. The recorded application is NISSAN Sunny. For 6205-026, Verify the complete suffix on the OE number because nearby references can use different plugs or mounting geometry. Record 6205-026 with the approved OE reference.
HVAC Interface and 27200-4M460 installation
During work on 6205-026, If 27200-4M460 airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the 27200-4M460 motor is the only cause. Recheck 6205-026 before the lower trim is closed.
For item 6205-026, confirm that the 27200-4M460 centrifugal wheel clears its housing and that the 6205-026 connector lock engages without force. After seating 6205-026, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6205-026.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 27200-4M460 |
| Cross-reference numbers | 27200-4M410 / 27200-4M400 / 27200-4M461 |
| Vehicle brand | NISSAN |
| Vehicle model | Sunny |
| Model year | Confirm by OE reference |
| 27200-4M460 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6205-026, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6205-026 record remains the picking reference.
For trade item 6205-026, Export buyers should state quantity and delivery country together with any pallet, carton or private-label requirement. Keep 6205-026 on the packing instruction.
Frequently Asked Questions
How should item 6205-026 and blower number 27200-4M460 be verified?
Match 6205-026 to the complete 27200-4M460 marking, then compare the 6205-026 plug, terminal count, mounting flange and wheel dimensions with the removed NISSAN unit.
Can 6205-026 have more than one vehicle-side blower configuration?
Yes. NISSAN production changes can affect 6205-026; confirm steering position, climate-control specification and the original 6205-026 geometry before approval.
What circuit checks are useful when 6205-026 does not operate?
For 6205-026, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6205-026 motor again.
Which details should accompany a wholesale request for 6205-026?
Provide item 6205-026, OE 27200-4M460, the stated application, quantity and destination; add 6205-026 carton or private-label requirements separately.
How can noise be avoided after fitting 6205-026?
Clear debris from the air inlet, check that the 6205-026 wheel turns freely, seat the 6205-026 flange evenly and keep wiring away from the impeller.
Request a quote for 6205-026: Send 27200-4M460, the 6205-026 application and required quantity for a fitment and supply review.
