26010-6CA0A Head Light for NISSAN Altima Right
Primary OE reference: 26010-6CA0A
Cross-reference number 1: 26010-6CA0A
Product type: Head Light Assembly
Applicable vehicle: NISSAN Altima
Installation position: Right front headlamp position
Brand: NISSAN
Model: Altima
Vehicle year: Confirm by production record
Lighting configuration: standard equipment version, US-market specification
Housing comparison: Verify the inner and outer corners of the housing as well as the gap to adjacent panels; these points often separate neighbouring variants.
Optical system: Establish whether the original lighting system uses a reflector, projector, halogen bulb, xenon burner or integrated LED light source.
Electrical interface: Do not use connector colour as the only selection point; terminal geometry, locking tabs and installed modules must also agree.
Mounting points: Verify mounting-ear spacing and support height against the removed lamp, including any hidden guide pin behind the bumper or grille edge.
Installation guidance: Transfer only undamaged reusable hardware, confirm the rear caps seal correctly and verify lamp operation before completing surrounding trim.
Wholesale packing: Mixed orders should establish vehicle application and side clearly, with protective packing around the optical face and electrical connections.
Application-specific focus: For the right NISSAN Altima application with standard equipment version, us-market specification, confirm that the beam system and visible lamp signature correspond to the vehicle trim rather than selecting by exterior outline alone.
Head Light Assembly Overview
This product record supports physical comparison of a front lamp assembly for workshop replacement and wholesale purchasing. It is catalogued under OE reference 26010-6CA0A for NISSAN Altima, with the right position identified in the source record.
The photographed lens, internal optical layout, rear casing and attachment points should be reviewed as one system. A close-looking lamp from another trim or market can differ behind the body opening.
Lighting Function and Optical Configuration
Determine whether the original lighting system uses a reflector, projector, halogen bulb, xenon burner or integrated LED light source.
For the Altima application, verify the lighting package fitted to the vehicle. Standard, projector, xenon and LED versions can use alternative internal modules, beam controls and daytime-light signatures.
Vehicle Fitment and Body Interface
Review the inner and outer corners of the housing as well as the gap to adjacent panels; these points often separate adjacent variants.
Review mounting-ear spacing and support height against the removed lamp, including any hidden guide pin behind the bumper or grille edge.
Connector and Control Hardware
Do not use connector colour as the only selection point; terminal geometry, locking tabs and installed modules must also agree.
Validate the supply scope shown in the product photographs. Bulbs, rear caps, levelling motors, ballasts, LED drivers and auxiliary brackets may vary between versions and should be checked separately.
Installation and Beam Alignment
Tighten the fasteners evenly, restore adjacent covers only after functional testing, and review bonnet and bumper clearances one final time.
A qualified workshop should review surrounding supports for damage, complete the electrical tests and set the headlamp beam according to local requirements after installation.
Automotive Lighting Product Specifications
| Product type | Head Light Assembly |
|---|---|
| Primary OE reference | 26010-6CA0A |
| Cross-reference numbers | 26010-6CA0A |
| Internal item code | NS04001-060 |
| Vehicle brand | NISSAN |
| Vehicle model | Altima |
| Model year | Confirm by production record |
| Installation position | Right front |
| Lighting configuration | standard equipment version, US-market specification |
Wholesale Supply and Protective Packing
For repeat orders, record the approved product photographs and application record so the same optical and mounting version is specified.
When requesting a quotation, provide the vehicle application, production period, required side, lighting technology, quantity and destination. Original-lamp photographs are useful when several versions exist.
Application-Specific Comparison Notes
For this right NISSAN Altima headlamp, the standard equipment version, us-market specification specification should be assessed together with the Validate by production record body application. Review the inner and outer corners of the housing as well as the gap to adjacent panels; these points often separate adjacent variants.
The right Altima lighting package should remain the reference during electrical review. Compare every plug and socket with the original unit and establish whether the levelling motor, ballast or LED driver is included or transferred.
When fitting the NISSAN Altima unit at the right front position, preserve even body gaps and the intended beam orientation. Keep wiring clear of hot or moving components, then test low beam, high beam, indicator and daytime lighting where applicable.
Frequently Asked Questions
What distinguishes adjacent lighting variants?
Reflector, projector, xenon and LED versions can differ in modules, daytime-light layout, internal bezel and plug configuration.
Are bulbs and electronic modules included?
The included components are those photographed in the product photographs. Review bulbs, caps, motors, ballasts and LED modules separately.
Why must the rear housing be compared?
A similar lens can conceal a alternative casing depth, cap arrangement or bracket offset, preventing correct seating in the body opening.
How should headlamp fitment be confirmed?
For the right Altima lamp, compare the body outline, mounting tabs, connector and lighting technology with the removed unit. Model year alone may not distinguish every trim.
What photographs are useful for comparison?
Clear front, rear, connector and mounting-tab views help distinguish the required headlamp from a similar-looking alternative.
