2485479 Blower Motor for FORD
Primary OE reference: 2485479
Cross-reference 1: 2607284
Cross-reference 2: 2837095
Cross-reference 3: 3020586
Cross-reference 4: 655-1063
Product type: Automotive HVAC Blower Motor
Applicable vehicle: FORD
Brand: FORD
Model: Confirm by OE reference
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: The blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode.
Installation guidance: Transfer only serviceable seals or hardware specified for the application and confirm the connector locks without force.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
2485479 Automotive Blower Motor Overview
This page records the pictured HVAC blower motor under OE reference 2485479 for application-led sourcing.
For catalogue item 6203-098, Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts. Use 6203-098 when comparing this 2485479 airflow configuration.
OE Reference and Application
The primary catalogue number is 2485479. The recorded application is FORD. For 6203-098, Measure the 2485479 wheel height and outer diameter, then compare the electrical socket and base contour with the 2485479 product photos. Record 6203-098 with the approved OE reference.
HVAC Interface and 2485479 installation
During work on 6203-098, Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after 2485479 installation. Recheck 6203-098 before the lower trim is closed.
For item 6203-098, confirm that the 2485479 centrifugal wheel clears its housing and that the 6203-098 connector lock engages without force. After seating 6203-098, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6203-098.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 2485479 |
| Cross-reference numbers | 2607284 / 2837095 / 3020586 / 655-1063 |
| Vehicle brand | FORD |
| Vehicle model | Confirm by OE reference |
| Model year | Confirm by OE reference |
| 2485479 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6203-098, Packing preparation accounts for the 2485479 motor weight and wheel shape to reduce movement inside the carton. The 6203-098 record remains the picking reference.
For trade item 6203-098, For a quotation, provide the OE number, required quantity, vehicle application, destination and preferred carton marking. Keep 6203-098 on the packing instruction.
Frequently Asked Questions
How should item 6203-098 and blower number 2485479 be verified?
Match 6203-098 to the complete 2485479 marking, then compare the 6203-098 plug, terminal count, mounting flange and wheel dimensions with the removed FORD unit.
Can 6203-098 have more than one vehicle-side blower configuration?
Yes. FORD production changes can affect 6203-098; confirm steering position, climate-control specification and the original 6203-098 geometry before approval.
What circuit checks are useful when 6203-098 does not operate?
For 6203-098, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6203-098 motor again.
Which details should accompany a wholesale request for 6203-098?
Provide item 6203-098, OE 2485479, the stated application, quantity and destination; add 6203-098 carton or private-label requirements separately.
How can noise be avoided after fitting 6203-098?
Clear debris from the air inlet, check that the 6203-098 wheel turns freely, seat the 6203-098 flange evenly and keep wiring away from the impeller.
Request a quote for 6203-098: Send 2485479, the 6203-098 application and required quantity for a fitment and supply review.
