23506046 Blower Motor for BUICK Regal 2017
Primary OE reference: 23506046
Cross-reference 1: 26697393
Cross-reference 2: 85598159
Cross-reference 3: 84486322
Cross-reference 4: LX6Z19805GB
Cross-reference 5: 700347
Product type: Automotive HVAC Blower Motor
Applicable vehicle: BUICK Regal 2017
Brand: BUICK
Model: Regal
Vehicle year: 2017
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Stable wheel rotation helps distribute air without relying on vehicle speed, making the blower important at idle and in traffic.
Installation guidance: Seat the mounting flange evenly, avoid impact to the plastic impeller, and listen for rubbing or imbalance during the first test.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
23506046 Automotive Blower Motor Overview
YoonShan catalogues 23506046 as an HVAC 23506046 airflow component for workshops, distributors and export buyers.
For catalogue item 6208-009, When the climate-control circuit commands 23506046 airflow, the electric motor rotates the 23506046 fan wheel inside the HVAC housing. Use 6208-009 when comparing this 23506046 airflow configuration.
OE Reference and Application
The primary catalogue number is 23506046. The recorded application is BUICK Regal 2017. For 6208-009, Compare the OE label, plug key, terminal count, mounting flange and fan-wheel diameter with the removed BUICK unit. Record 6208-009 with the approved OE reference.
HVAC Interface and 23506046 installation
During work on 6208-009, If 23506046 airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the 23506046 motor is the only cause. Recheck 6208-009 before the lower trim is closed.
For item 6208-009, confirm that the 23506046 centrifugal wheel clears its housing and that the 6208-009 connector lock engages without force. After seating 6208-009, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6208-009.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 23506046 |
| Cross-reference numbers | 26697393 / 85598159 / 84486322 / LX6Z19805GB / 700347 |
| Vehicle brand | BUICK |
| Vehicle model | Regal |
| Model year | 2017 |
| 23506046 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6208-009, Packing preparation accounts for the 23506046 motor weight and wheel shape to reduce movement inside the carton. The 6208-009 record remains the picking reference.
For trade item 6208-009, For a quotation, provide the OE number, required quantity, vehicle application, destination and preferred carton marking. Keep 6208-009 on the packing instruction.
Frequently Asked Questions
How should item 6208-009 and blower number 23506046 be verified?
Match 6208-009 to the complete 23506046 marking, then compare the 6208-009 plug, terminal count, mounting flange and wheel dimensions with the removed BUICK unit.
Can 6208-009 have more than one vehicle-side blower configuration?
Yes. BUICK production changes can affect 6208-009; confirm steering position, climate-control specification and the original 6208-009 geometry before approval.
What circuit checks are useful when 6208-009 does not operate?
For 6208-009, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6208-009 motor again.
Which details should accompany a wholesale request for 6208-009?
Provide item 6208-009, OE 23506046, the stated application, quantity and destination; add 6208-009 carton or private-label requirements separately.
How can noise be avoided after fitting 6208-009?
Clear debris from the air inlet, check that the 6208-009 wheel turns freely, seat the 6208-009 flange evenly and keep wiring away from the impeller.
Request a quote for 6208-009: Send 23506046, the 6208-009 application and required quantity for a fitment and supply review.
