22000-40001 Blower Motor for JAC Heyue
Primary OE reference: 22000-40001
Cross-reference 1: S8103L
Product type: Automotive HVAC Blower Motor
Applicable vehicle: JAC Heyue
Brand: JAC
Model: Heyue
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.
Installation guidance: Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
22000-40001 Automotive Blower Motor Overview
Reference 22000-40001 identifies the cabin-air blower assembly shown for the stated vehicle application.
For catalogue item 6213-003, the 22000-40001 blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6213-003 when comparing this 22000-40001 airflow configuration.
OE Reference and Application
The primary catalogue number is 22000-40001. The recorded application is JAC Heyue. For 6213-003, For mixed-market vehicles, confirm steering position and climate-control specification together with the physical blower dimensions. Record 6213-003 with the approved OE reference.
HVAC Interface and 22000-40001 installation
During work on 6213-003, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6213-003 before the lower trim is closed.
For item 6213-003, confirm that the 22000-40001 centrifugal wheel clears its housing and that the 6213-003 connector lock engages without force. After seating 6213-003, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6213-003.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 22000-40001 |
| Cross-reference numbers | S8103L |
| Vehicle brand | JAC |
| Vehicle model | Heyue |
| Model year | Confirm by OE reference |
| 22000-40001 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6213-003, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6213-003 record remains the picking reference.
For trade item 6213-003, Distributors can request neutral or customized packing after quantities, label content and destination are confirmed. Keep 6213-003 on the packing instruction.
Frequently Asked Questions
How should item 6213-003 and blower number 22000-40001 be verified?
Match 6213-003 to the complete 22000-40001 marking, then compare the 6213-003 plug, terminal count, mounting flange and wheel dimensions with the removed JAC unit.
Can 6213-003 have more than one vehicle-side blower configuration?
Yes. JAC production changes can affect 6213-003; confirm steering position, climate-control specification and the original 6213-003 geometry before approval.
What circuit checks are useful when 6213-003 does not operate?
For 6213-003, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6213-003 motor again.
Which details should accompany a wholesale request for 6213-003?
Provide item 6213-003, OE 22000-40001, the stated application, quantity and destination; add 6213-003 carton or private-label requirements separately.
How can noise be avoided after fitting 6213-003?
Clear debris from the air inlet, check that the 6213-003 wheel turns freely, seat the 6213-003 flange evenly and keep wiring away from the impeller.
Request a quote for 6213-003: Send 22000-40001, the 6213-003 application and required quantity for a fitment and supply review.
