2130609 Blower Motor for DAF
Primary OE reference: 2130609
Product type: Automotive HVAC Blower Motor
Applicable vehicle: DAF
Brand: DAF
Model: Confirm by OE reference
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Stable wheel rotation helps distribute air without relying on vehicle speed, making the blower important at idle and in traffic.
Installation guidance: Seat the mounting flange evenly, avoid impact to the plastic impeller, and listen for rubbing or imbalance during the first test.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
2130609 Automotive Blower Motor Overview
YoonShan catalogues 2130609 as an HVAC 2130609 airflow component for workshops, distributors and export buyers.
For catalogue item 6260-208, When the climate-control circuit commands 2130609 airflow, the electric motor rotates the 2130609 fan wheel inside the HVAC housing. Use 6260-208 when comparing this 2130609 airflow configuration.
OE Reference and Application
The primary catalogue number is 2130609. The recorded application is DAF. For 6260-208, Compare the OE label, plug key, terminal count, mounting flange and fan-wheel diameter with the removed DAF unit. Record 6260-208 with the approved OE reference.
HVAC Interface and 2130609 installation
During work on 6260-208, If 2130609 airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the 2130609 motor is the only cause. Recheck 6260-208 before the lower trim is closed.
For item 6260-208, confirm that the 2130609 centrifugal wheel clears its housing and that the 6260-208 connector lock engages without force. After seating 6260-208, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6260-208.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 2130609 |
| Cross-reference numbers | 2130609 |
| Vehicle brand | DAF |
| Vehicle model | Confirm by OE reference |
| Model year | Confirm by OE reference |
| 2130609 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6260-208, Packing preparation accounts for the 2130609 motor weight and wheel shape to reduce movement inside the carton. The 6260-208 record remains the picking reference.
For trade item 6260-208, To reduce selection errors, include the original-part photograph and connector view with the purchase list. Keep 6260-208 on the packing instruction.
Frequently Asked Questions
How should item 6260-208 and blower number 2130609 be verified?
Match 6260-208 to the complete 2130609 marking, then compare the 6260-208 plug, terminal count, mounting flange and wheel dimensions with the removed DAF unit.
Can 6260-208 have more than one vehicle-side blower configuration?
Yes. DAF production changes can affect 6260-208; confirm steering position, climate-control specification and the original 6260-208 geometry before approval.
What circuit checks are useful when 6260-208 does not operate?
For 6260-208, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6260-208 motor again.
Which details should accompany a wholesale request for 6260-208?
Provide item 6260-208, OE 2130609, the stated application, quantity and destination; add 6260-208 carton or private-label requirements separately.
How can noise be avoided after fitting 6260-208?
Clear debris from the air inlet, check that the 6260-208 wheel turns freely, seat the 6260-208 flange evenly and keep wiring away from the impeller.
Request a quote for 6260-208: Send 2130609, the 6260-208 application and required quantity for a fitment and supply review.
