1K8955109BGRU Front Left Headlight Washer Nozzle Cover for VOLKSWAGEN Scirocco 2009
Primary OE reference: 1K8955109BGRU
Cross-reference number 1: 1K8 955 109B GRU
Cross-reference number 2: 1K8955109BGRU
Product type: Front Left Headlight Washer Nozzle Cover
Vehicle application: VOLKSWAGEN Scirocco 2009
Installation position: Front bumper / headlight washer area
Side: Left
Brand: VOLKSWAGEN
Model: Scirocco
Model year: 2009
Product function: Closes the bumper washer opening and restores the visible exterior contour around the headlamp.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
Surface finish: Compare the visible colour and texture with the original part; painting may be required before final installation.
Internal item code: VM02010-007
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
1K8955109BGRU Front Left Headlight Washer Nozzle Cover Product Overview
The component shown under 1K8955109BGRU is a front left headlight washer nozzle cover intended for VOLKSWAGEN Scirocco 2009. The visible cover closes the bumper opening around the washer unit and follows the surrounding bumper contour when the nozzle is retracted. Confirm the left orientation, washer-system connection, bumper-side geometry against the original vehicle part.
Fitment and Washer-System Application for Scirocco
Compatibility for 1K8955109BGRU should be confirmed against VOLKSWAGEN Scirocco 2009 and the left installation side. The review should verify that the OE reference is not for the opposite side, verify the required left or right installation side, and compare every tab, clip seat and locating shoulder. Use the removed part and product photographs to retain the removed component for a direct physical comparison, compare the complete OE marking with the removed washer component, and verify nearby parking-sensor or trim interfaces; finally, match the mounting pattern around the bumper aperture and check the washer jet position relative to the headlamp lens.
Headlight Washer Nozzle Cover Function and Design Notes
The visible and hidden interfaces of VM02010-007 should be checked separately. For this headlight washer nozzle cover, inspect the washer outlet for blockage, compare the support flange width, and review the engagement of the cover with the nozzle stem. A direct comparison with the removed part should additionally check each molded locator against the original component, inspect the actuator barrel for impact damage, and compare the cap perimeter and corner radii. Before the item is accepted, review the bracket stiffness and screw seats and check the joint between the visible cap and hidden support.
OE Identification and Side Confirmation
1K8955109BGRU is the primary OE identity for this left front left headlight washer nozzle cover, while VM02010-007 is the internal item code. Match both references to the vehicle record, then review facelift and pre-facelift washer layouts. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for VM02010-007 begins before the bumper area is disturbed: work with the washer system depressurized and align the cover flush with the bumper surface. During trial fitting, avoid forcing a mirrored part into the bumper opening, tighten bracket hardware only after alignment, and paint or finish visible covers before final installation when required. Before returning the vehicle to service, verify that the cover closes without rubbing the bumper, confirm that no hose is pinched behind the bumper, and protect the painted bumper surface during removal.
Receiving Inspection
When VM02010-007 arrives, receiving staff should verify that protective plugs remain in open fluid connections, protect the visible face again after inspection is complete, and verify the supplied scope before discarding dividers or inner bags. Before workshop release, review the production finish against the approved sample, review the hose spigot for impact damage or distortion, retain the OE label until the washer system has passed its function test, and verify the nozzle head returns smoothly without applying excess force. Complete the inspection by ensuring that staff confirm that loose accessories are identified on the packing list, check the actuator body for straightness before trial installation, and inspect the visible cover face for scratches or pressure marks.
Product Technical Specifications
| Product type | Front Left Headlight Washer Nozzle Cover |
|---|---|
| Primary OE reference | 1K8955109BGRU |
| Cross-reference numbers | 1K8 955 109B GRU 1K8955109BGRU |
| Internal item code | VM02010-007 |
| Vehicle brand | VOLKSWAGEN |
| Vehicle model | Scirocco |
| Model year | 2009 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Left |
| Applicable vehicle | VOLKSWAGEN Scirocco 2009 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 1K8955109BGRU, please confirm sample requirements before a bulk order, confirm the preferred incoterm, and state any outer-carton marking requirements. Packing instructions should include the full OE reference on the purchase order, request export-carton dimensions before freight booking, and request moisture protection for sea freight. Before dispatch, request replacement-part documentation when required and confirm whether the visible cover needs a primed or finished surface.
Frequently Asked Questions
Which vehicle application is listed for 1K8955109BGRU?
1K8955109BGRU is listed for VOLKSWAGEN Scirocco 2009. Confirm the complete OE reference, model year, bumper specification and installation side against the vehicle. For item VM02010-007, the approval should verify the required left or right installation side. The same item record should also confirm the destination-market equipment specification.
Can 1K8955109BGRU fit every Scirocco model year?
No. Styling changes and market equipment can alter washer locations and mounting geometry. Use the listed year and full OE number as the starting point for confirmation. On the listed VOLKSWAGEN Scirocco 2009, technicians should check whether the original cover is supplied separately from its support. A workshop comparison should additionally check whether the original cover is supplied separately from its support.
Is workshop installation recommended for 1K8955109BGRU?
Yes. A qualified workshop can access the bumper area on the Scirocco, transfer hoses or clips safely and test the washer system for correct operation and leaks. For the left-side order line, test the spray direction before returning the vehicle. The order review should further verify that the cover closes without rubbing the bumper.
How should 1K8955109BGRU be packed for export?
The front left headlight washer nozzle cover should be wrapped separately, with visible faces, hose spigots, nozzle outlets and projecting tabs protected from compression and contamination. The product-specific check for 1K8955109BGRU should request a packing-list breakdown by internal item code. Receiving staff should also identify painted and unpainted variants on separate lines.
Is 1K8955109BGRU a complete headlight washer system?
No. This listing covers the pictured headlight washer nozzle cover. The pump, reservoir, hoses, opposite-side parts and headlamp assembly are not included unless shown in the photographs. Before this headlight washer nozzle cover is accepted, verify the packed quantity by OE reference. Before approval, the buyer or technician should list model years and bumper versions for mixed orders.
