1K2A161B10 Blower Motor for KIA Sephia
Primary OE reference: 1K2A161B10
Cross-reference 1: 1K2A161B10A
Cross-reference 2: 1K2N161B10
Product type: Automotive HVAC Blower Motor
Applicable vehicle: KIA Sephia
Brand: KIA
Model: Sephia
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.
Installation guidance: Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
1K2A161B10 Automotive Blower Motor Overview
Reference 1K2A161B10 identifies the cabin-air blower assembly shown for the stated vehicle application.
For catalogue item 6202-029, the 1K2A161B10 blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6202-029 when comparing this 1K2A161B10 airflow configuration.
OE Reference and Application
The primary catalogue number is 1K2A161B10. The recorded application is KIA Sephia. For 6202-029, For mixed-market vehicles, confirm steering position and climate-control specification together with the physical blower dimensions. Record 6202-029 with the approved OE reference.
HVAC Interface and 1K2A161B10 installation
During work on 6202-029, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6202-029 before the lower trim is closed.
For item 6202-029, confirm that the 1K2A161B10 centrifugal wheel clears its housing and that the 6202-029 connector lock engages without force. After seating 6202-029, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6202-029.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 1K2A161B10 |
| Cross-reference numbers | 1K2A161B10A / 1K2N161B10 |
| Vehicle brand | KIA |
| Vehicle model | Sephia |
| Model year | Confirm by OE reference |
| 1K2A161B10 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6202-029, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6202-029 record remains the picking reference.
For trade item 6202-029, Distributors can request neutral or customized packing after quantities, label content and destination are confirmed. Keep 6202-029 on the packing instruction.
Frequently Asked Questions
How should item 6202-029 and blower number 1K2A161B10 be verified?
Match 6202-029 to the complete 1K2A161B10 marking, then compare the 6202-029 plug, terminal count, mounting flange and wheel dimensions with the removed KIA unit.
Can 6202-029 have more than one vehicle-side blower configuration?
Yes. KIA production changes can affect 6202-029; confirm steering position, climate-control specification and the original 6202-029 geometry before approval.
What circuit checks are useful when 6202-029 does not operate?
For 6202-029, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6202-029 motor again.
Which details should accompany a wholesale request for 6202-029?
Provide item 6202-029, OE 1K2A161B10, the stated application, quantity and destination; add 6202-029 carton or private-label requirements separately.
How can noise be avoided after fitting 6202-029?
Clear debris from the air inlet, check that the 6202-029 wheel turns freely, seat the 6202-029 flange evenly and keep wiring away from the impeller.
Request a quote for 6202-029: Send 1K2A161B10, the 6202-029 application and required quantity for a fitment and supply review.
