1K0145803E Intercooler Assembly for VOLKSWAGEN Golf Plus
Product: Intercooler Assembly / Charge Air Cooler
Primary OE: 1K0145803E
Item code: VM01011-006
Cross-reference numbers:
No additional OE number listed in the source sheet.
Brand: VOLKSWAGEN
Model: Golf Plus
Function: Cools compressed turbo air before it reaches the intake manifold.
Supply: Wholesale aftermarket replacement for global cooling-system buyers.
Fitment check: Verify OE number, core size, hose connections and mounting points before ordering.
1K0145803E Intercooler Assembly for VOLKSWAGEN Golf Plus
Charge-air cooling efficiency depends on the correct core and connection geometry. The product shown is indexed by 1K0145803E for VOLKSWAGEN Golf Plus, with VM01011-006 used as the supplier reference.
By lowering compressed-air temperature before it enters the engine, the intercooler helps maintain air density and consistent turbo-system operation.
Product Technical Specifications
| Component | Intercooler assembly / charge-air cooler |
|---|---|
| Primary OE reference | 1K0145803E |
| Additional references | None listed |
| Brand application | VOLKSWAGEN |
| Model reference | Golf Plus |
| Internal SKU | VM01011-006 |
| Supply type | Aftermarket wholesale replacement |
Cooling Function in the Intake System
Oil mist around a joint, hissing under acceleration, low boost or reduced power can indicate a leaking intercooler or hose connection.
The replacement should preserve the original airflow path and charge-pipe geometry. Correct connector diameter and tank orientation are as important as overall core dimensions.
Buyer Matching Guide
- Compare 1K0145803E with every number printed on the removed intercooler.
- Confirm the vehicle model, production period, engine and turbo configuration.
- Measure core height, width and thickness as well as the overall assembly.
- Check inlet and outlet diameter, position, angle and retaining method.
- Match mounting tabs, sensor provisions, hose couplers and surrounding clearances.
Installation and System Checks
Inspect the complete boost circuit before fitting the new unit. Clean debris from nearby airflow passages, replace damaged seals or clamps, and follow the vehicle maker’s tightening and pressure-test procedure. A final road or workshop test should confirm stable boost with no abnormal air noise.
Wholesale Supply for VOLKSWAGEN Golf Plus
For export orders, available checks can cover core condition, tank alignment, connector dimensions, mounting points and protective carton packing.
For a quotation, send OE 1K0145803E, SKU VM01011-006, order volume and destination country. Photos of the original unit are recommended whenever the model, engine or connection layout is not fully documented.
Frequently Asked Questions
Is 1K0145803E guaranteed to fit every VOLKSWAGEN Golf Plus?
No. Vehicle production changes and engine options can use different charge-air coolers. Confirm the OE label and physical layout before purchase.
What should be compared besides the OE number?
Compare the core dimensions, tank shape, inlet and outlet positions, connector diameters, brackets and any sensor or valve provision.
Can a damaged intercooler reduce engine power?
Yes. A leak or restriction may reduce charge pressure and cooling efficiency. The hoses, clamps and turbo plumbing should be tested at the same time.
Can Yongshang Auto support sample or bulk orders?
Sample and wholesale enquiries are welcome. Supply the OE number, quantity, destination and packaging requirements for evaluation.
Are private-label cartons available?
Neutral or customized packaging can be discussed according to order quantity, artwork, labeling details and production schedule.
Request a Quote
Contact Yongshang Auto for a 1K0145803E VOLKSWAGEN Golf Plus intercooler quotation, product photographs or export-packing discussion.
Fitment notice: OE and model references support identification but do not replace VIN-based or original-part verification.
