194000-7411 Blower Motor for HONDA Accord
Primary OE reference: 194000-7411
Product type: Automotive HVAC Blower Motor
Applicable vehicle: HONDA Accord
Brand: HONDA
Model: Accord
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Cabin airflow depends on the motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together.
Installation guidance: Inspect the resistor or electronic controller and connector terminals if the original fault involved intermittent speed operation.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
194000-7411 Automotive Blower Motor Overview
The photographed motor-and-wheel unit is indexed by 194000-7411 to support OE-number comparison before purchase.
For catalogue item 6207-077, Cabin 194000-7411 airflow depends on the 194000-7411 motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together. Use 6207-077 when comparing this 194000-7411 airflow configuration.
OE Reference and Application
The primary catalogue number is 194000-7411. The recorded application is HONDA Accord. For 6207-077, Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower. Record 6207-077 with the approved OE reference.
HVAC Interface and 194000-7411 installation
During work on 6207-077, Inspect the resistor or electronic controller and connector terminals if the original fault involved intermittent speed operation. Recheck 6207-077 before the lower trim is closed.
For item 6207-077, confirm that the 194000-7411 centrifugal wheel clears its housing and that the 6207-077 connector lock engages without force. After seating 6207-077, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6207-077.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 194000-7411 |
| Cross-reference numbers | 194000-7411 |
| Vehicle brand | HONDA |
| Vehicle model | Accord |
| Model year | Confirm by OE reference |
| 194000-7411 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6207-077, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6207-077 record remains the picking reference.
For trade item 6207-077, Export buyers should state quantity and delivery country together with any pallet, carton or private-label requirement. Keep 6207-077 on the packing instruction.
Frequently Asked Questions
How should item 6207-077 and blower number 194000-7411 be verified?
Match 6207-077 to the complete 194000-7411 marking, then compare the 6207-077 plug, terminal count, mounting flange and wheel dimensions with the removed HONDA unit.
Can 6207-077 have more than one vehicle-side blower configuration?
Yes. HONDA production changes can affect 6207-077; confirm steering position, climate-control specification and the original 6207-077 geometry before approval.
What circuit checks are useful when 6207-077 does not operate?
For 6207-077, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6207-077 motor again.
Which details should accompany a wholesale request for 6207-077?
Provide item 6207-077, OE 194000-7411, the stated application, quantity and destination; add 6207-077 carton or private-label requirements separately.
How can noise be avoided after fitting 6207-077?
Clear debris from the air inlet, check that the 6207-077 wheel turns freely, seat the 6207-077 flange evenly and keep wiring away from the impeller.
Request a quote for 6207-077: Send 194000-7411, the 6207-077 application and required quantity for a fitment and supply review.
