194000-0443 Blower Motor for HONDA
Primary OE reference: 194000-0443
Product type: Automotive HVAC Blower Motor
Applicable vehicle: HONDA
Brand: HONDA
Model: Confirm by OE reference
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.
Installation guidance: Disconnect electrical power as required, remove trim without forcing clips, and trial-fit the blower before final tightening.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
194000-0443 Automotive Blower Motor Overview
Buyers comparing an interior fan motor can use 194000-0443 together with the 194000-0443 product images and vehicle data on this page.
For catalogue item 6207-091, the 194000-0443 blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6207-091 when comparing this 194000-0443 airflow configuration.
OE Reference and Application
The primary catalogue number is 194000-0443. The recorded application is HONDA. For 6207-091, Use the original motor number and clear front/rear photographs to distinguish similar left-hand-drive and right-hand-drive versions. Record 6207-091 with the approved OE reference.
HVAC Interface and 194000-0443 installation
During work on 6207-091, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6207-091 before the lower trim is closed.
For item 6207-091, confirm that the 194000-0443 centrifugal wheel clears its housing and that the 6207-091 connector lock engages without force. After seating 6207-091, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6207-091.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 194000-0443 |
| Cross-reference numbers | 194000-0443 |
| Vehicle brand | HONDA |
| Vehicle model | Confirm by OE reference |
| Model year | Confirm by OE reference |
| 194000-0443 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6207-091, Packing preparation accounts for the 194000-0443 motor weight and wheel shape to reduce movement inside the carton. The 6207-091 record remains the picking reference.
For trade item 6207-091, To reduce selection errors, include the original-part photograph and connector view with the purchase list. Keep 6207-091 on the packing instruction.
Frequently Asked Questions
How should item 6207-091 and blower number 194000-0443 be verified?
Match 6207-091 to the complete 194000-0443 marking, then compare the 6207-091 plug, terminal count, mounting flange and wheel dimensions with the removed HONDA unit.
Can 6207-091 have more than one vehicle-side blower configuration?
Yes. HONDA production changes can affect 6207-091; confirm steering position, climate-control specification and the original 6207-091 geometry before approval.
What circuit checks are useful when 6207-091 does not operate?
For 6207-091, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6207-091 motor again.
Which details should accompany a wholesale request for 6207-091?
Provide item 6207-091, OE 194000-0443, the stated application, quantity and destination; add 6207-091 carton or private-label requirements separately.
How can noise be avoided after fitting 6207-091?
Clear debris from the air inlet, check that the 6207-091 wheel turns freely, seat the 6207-091 flange evenly and keep wiring away from the impeller.
Request a quote for 6207-091: Send 194000-0443, the 6207-091 application and required quantity for a fitment and supply review.
