19144548 Blower Motor for FORD
Primary OE reference: 19144548
Cross-reference 1: 19188952
Cross-reference 2: 3W4Z19805AA
Cross-reference 3: F8VZ19805AA
Cross-reference 4: F8VZ19805BA
Cross-reference 5: XW4Z19805CA
Product type: Automotive HVAC Blower Motor
Applicable vehicle: FORD
Brand: FORD
Model: Confirm by OE reference
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Stable wheel rotation helps distribute air without relying on vehicle speed, making the blower important at idle and in traffic.
Installation guidance: If airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the motor is the only cause.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
19144548 Automotive Blower Motor Overview
The 19144548 record is prepared for application-specific HVAC blower replacement and wholesale quotation.
For catalogue item 6204-125, When the climate-control circuit commands 19144548 airflow, the electric motor rotates the 19144548 fan wheel inside the HVAC housing. Use 6204-125 when comparing this 19144548 airflow configuration.
OE Reference and Application
The primary catalogue number is 19144548. The recorded application is FORD. For 6204-125, Verify the complete suffix on the OE number because nearby references can use different plugs or mounting geometry. Record 6204-125 with the approved OE reference.
HVAC Interface and 19144548 installation
During work on 6204-125, If 19144548 airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the 19144548 motor is the only cause. Recheck 6204-125 before the lower trim is closed.
For item 6204-125, confirm that the 19144548 centrifugal wheel clears its housing and that the 6204-125 connector lock engages without force. After seating 6204-125, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6204-125.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 19144548 |
| Cross-reference numbers | 19188952 / 3W4Z19805AA / F8VZ19805AA / F8VZ19805BA / XW4Z19805CA |
| Vehicle brand | FORD |
| Vehicle model | Confirm by OE reference |
| Model year | Confirm by OE reference |
| 19144548 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6204-125, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6204-125 record remains the picking reference.
For trade item 6204-125, Wholesale enquiries should identify the reference, quantity, market and packaging requirement so the correct variant is selected. Keep 6204-125 on the packing instruction.
Frequently Asked Questions
How should item 6204-125 and blower number 19144548 be verified?
Match 6204-125 to the complete 19144548 marking, then compare the 6204-125 plug, terminal count, mounting flange and wheel dimensions with the removed FORD unit.
Can 6204-125 have more than one vehicle-side blower configuration?
Yes. FORD production changes can affect 6204-125; confirm steering position, climate-control specification and the original 6204-125 geometry before approval.
What circuit checks are useful when 6204-125 does not operate?
For 6204-125, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6204-125 motor again.
Which details should accompany a wholesale request for 6204-125?
Provide item 6204-125, OE 19144548, the stated application, quantity and destination; add 6204-125 carton or private-label requirements separately.
How can noise be avoided after fitting 6204-125?
Clear debris from the air inlet, check that the 6204-125 wheel turns freely, seat the 6204-125 flange evenly and keep wiring away from the impeller.
Request a quote for 6204-125: Send 19144548, the 6204-125 application and required quantity for a fitment and supply review.
