15-81062 Blower Motor for BUICK Enclave
Primary OE reference: 15-81062
Cross-reference 1: 15920865
Cross-reference 2: 15-817881
Cross-reference 3: 76976
Cross-reference 4: 331101402
Cross-reference 5: 6552870
Cross-reference 6: PM5132
Cross-reference 7: 15-81781
Cross-reference 8: 52027354
Product type: Automotive HVAC Blower Motor
Applicable vehicle: BUICK Enclave
Brand: BUICK
Model: Enclave
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Cabin airflow depends on the motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together.
Installation guidance: Inspect the resistor or electronic controller and connector terminals if the original fault involved intermittent speed operation.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
15-81062 Automotive Blower Motor Overview
The photographed motor-and-wheel unit is indexed by 15-81062 to support OE-number comparison before purchase.
For catalogue item 6208-028, Cabin 15-81062 airflow depends on the 15-81062 motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together. Use 6208-028 when comparing this 15-81062 airflow configuration.
OE Reference and Application
The primary catalogue number is 15-81062. The recorded application is BUICK Enclave. For 6208-028, Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower. Record 6208-028 with the approved OE reference.
HVAC Interface and 15-81062 installation
During work on 6208-028, Inspect the resistor or electronic controller and connector terminals if the original fault involved intermittent speed operation. Recheck 6208-028 before the lower trim is closed.
For item 6208-028, confirm that the 15-81062 centrifugal wheel clears its housing and that the 6208-028 connector lock engages without force. After seating 6208-028, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6208-028.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 15-81062 |
| Cross-reference numbers | 15920865 / 15-817881 / 76976 / 331101402 / 6552870 / PM5132 / 15-81781 / 52027354 |
| Vehicle brand | BUICK |
| Vehicle model | Enclave |
| Model year | Confirm by OE reference |
| 15-81062 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6208-028, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6208-028 record remains the picking reference.
For trade item 6208-028, Export buyers should state quantity and delivery country together with any pallet, carton or private-label requirement. Keep 6208-028 on the packing instruction.
Frequently Asked Questions
How should item 6208-028 and blower number 15-81062 be verified?
Match 6208-028 to the complete 15-81062 marking, then compare the 6208-028 plug, terminal count, mounting flange and wheel dimensions with the removed BUICK unit.
Can 6208-028 have more than one vehicle-side blower configuration?
Yes. BUICK production changes can affect 6208-028; confirm steering position, climate-control specification and the original 6208-028 geometry before approval.
What circuit checks are useful when 6208-028 does not operate?
For 6208-028, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6208-028 motor again.
Which details should accompany a wholesale request for 6208-028?
Provide item 6208-028, OE 15-81062, the stated application, quantity and destination; add 6208-028 carton or private-label requirements separately.
How can noise be avoided after fitting 6208-028?
Clear debris from the air inlet, check that the 6208-028 wheel turns freely, seat the 6208-028 flange evenly and keep wiring away from the impeller.
Request a quote for 6208-028: Send 15-81062, the 6208-028 application and required quantity for a fitment and supply review.
