116360-2671 Blower Motor for LAND ROVER Discovery 2007-2020
Primary OE reference: 116360-2671
Cross-reference 1: LR082160
Product type: Automotive HVAC Blower Motor
Applicable vehicle: LAND ROVER Discovery 2007-2020
Brand: LAND ROVER
Model: Discovery
Vehicle year: 2007-2020
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.
Installation guidance: Disconnect electrical power as required, remove trim without forcing clips, and trial-fit the blower before final tightening.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
116360-2671 Automotive Blower Motor Overview
Buyers comparing an interior fan motor can use 116360-2671 together with the 116360-2671 product images and vehicle data on this page.
For catalogue item 6238-007, the 116360-2671 blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6238-007 when comparing this 116360-2671 airflow configuration.
OE Reference and Application
The primary catalogue number is 116360-2671. The recorded application is LAND ROVER Discovery 2007-2020. For 6238-007, Use the original motor number and clear front/rear photographs to distinguish similar left-hand-drive and right-hand-drive versions. Record 6238-007 with the approved OE reference.
HVAC Interface and 116360-2671 installation
During work on 6238-007, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6238-007 before the lower trim is closed.
For item 6238-007, confirm that the 116360-2671 centrifugal wheel clears its housing and that the 6238-007 connector lock engages without force. After seating 6238-007, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6238-007.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 116360-2671 |
| Cross-reference numbers | LR082160 |
| Vehicle brand | LAND ROVER |
| Vehicle model | Discovery |
| Model year | 2007-2020 |
| 116360-2671 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6238-007, Packing preparation accounts for the 116360-2671 motor weight and wheel shape to reduce movement inside the carton. The 6238-007 record remains the picking reference.
For trade item 6238-007, For a quotation, provide the OE number, required quantity, vehicle application, destination and preferred carton marking. Keep 6238-007 on the packing instruction.
Frequently Asked Questions
How should item 6238-007 and blower number 116360-2671 be verified?
Match 6238-007 to the complete 116360-2671 marking, then compare the 6238-007 plug, terminal count, mounting flange and wheel dimensions with the removed LAND ROVER unit.
Can 6238-007 have more than one vehicle-side blower configuration?
Yes. LAND ROVER production changes can affect 6238-007; confirm steering position, climate-control specification and the original 6238-007 geometry before approval.
What circuit checks are useful when 6238-007 does not operate?
For 6238-007, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6238-007 motor again.
Which details should accompany a wholesale request for 6238-007?
Provide item 6238-007, OE 116360-2671, the stated application, quantity and destination; add 6238-007 carton or private-label requirements separately.
How can noise be avoided after fitting 6238-007?
Clear debris from the air inlet, check that the 6238-007 wheel turns freely, seat the 6238-007 flange evenly and keep wiring away from the impeller.
Request a quote for 6238-007: Send 116360-2671, the 6238-007 application and required quantity for a fitment and supply review.
