1111936 Blower Motor for FORD Focus
Primary OE reference: 1111936
Cross-reference 1: TYC700105
Cross-reference 2: 75754
Cross-reference 3: 615-00601
Cross-reference 4: PM9202
Cross-reference 5: 1062247
Cross-reference 6: XS4H18456AA
Cross-reference 7: XS4H18456AB
Cross-reference 8: XS4H18456AC
Cross-reference 9: XS4H18456AD
Cross-reference 10: YS4Z19805AB
Cross-reference 11: F03126121
Cross-reference 12: 1092286
Cross-reference 13: 1151988
Cross-reference 14: 1116783
Cross-reference 15: 1116781
Cross-reference 16: 1122463
Cross-reference 17: 11493
Cross-reference 18: 700105
Cross-reference 19: NRF
Cross-reference 20: 34032
Cross-reference 21: 2T1H18456AA
Cross-reference 22: 2T1Z18568A
Product type: Automotive HVAC Blower Motor
Applicable vehicle: FORD Focus
Brand: FORD
Model: Focus
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Stable wheel rotation helps distribute air without relying on vehicle speed, making the blower important at idle and in traffic.
Installation guidance: If airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the motor is the only cause.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
1111936 Automotive Blower Motor Overview
The 1111936 record is prepared for application-specific HVAC blower replacement and wholesale quotation.
For catalogue item 6203-017, When the climate-control circuit commands 1111936 airflow, the electric motor rotates the 1111936 fan wheel inside the HVAC housing. Use 6203-017 when comparing this 1111936 airflow configuration.
OE Reference and Application
The primary catalogue number is 1111936. The recorded application is FORD Focus. For 6203-017, Verify the complete suffix on the OE number because nearby references can use different plugs or mounting geometry. Record 6203-017 with the approved OE reference.
HVAC Interface and 1111936 installation
During work on 6203-017, If 1111936 airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the 1111936 motor is the only cause. Recheck 6203-017 before the lower trim is closed.
For item 6203-017, confirm that the 1111936 centrifugal wheel clears its housing and that the 6203-017 connector lock engages without force. After seating 6203-017, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6203-017.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 1111936 |
| Cross-reference numbers | TYC700105 / 75754 / 615-00601 / PM9202 / 1062247 / XS4H18456AA / XS4H18456AB / XS4H18456AC / XS4H18456AD / YS4Z19805AB / F03126121 / 1092286 / 1151988 / 1116783 / 1116781 / 1122463 / 11493 / 700105 / NRF / 34032 / 2T1H18456AA / 2T1Z18568A |
| Vehicle brand | FORD |
| Vehicle model | Focus |
| Model year | Confirm by OE reference |
| 1111936 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6203-017, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6203-017 record remains the picking reference.
For trade item 6203-017, For repeat orders, quote the same SKU and OE reference while noting any change in vehicle market or steering position. Keep 6203-017 on the packing instruction.
Frequently Asked Questions
How should item 6203-017 and blower number 1111936 be verified?
Match 6203-017 to the complete 1111936 marking, then compare the 6203-017 plug, terminal count, mounting flange and wheel dimensions with the removed FORD unit.
Can 6203-017 have more than one vehicle-side blower configuration?
Yes. FORD production changes can affect 6203-017; confirm steering position, climate-control specification and the original 6203-017 geometry before approval.
What circuit checks are useful when 6203-017 does not operate?
For 6203-017, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6203-017 motor again.
Which details should accompany a wholesale request for 6203-017?
Provide item 6203-017, OE 1111936, the stated application, quantity and destination; add 6203-017 carton or private-label requirements separately.
How can noise be avoided after fitting 6203-017?
Clear debris from the air inlet, check that the 6203-017 wheel turns freely, seat the 6203-017 flange evenly and keep wiring away from the impeller.
Request a quote for 6203-017: Send 1111936, the 6203-017 application and required quantity for a fitment and supply review.
