1038587 Blower Motor for FORD Galaxy
Primary OE reference: 1038587
Cross-reference 1: 1109798
Product type: Automotive HVAC Blower Motor
Applicable vehicle: FORD Galaxy
Brand: FORD
Model: Galaxy
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: The blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode.
Installation guidance: Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after installation.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
1038587 Automotive Blower Motor Overview
This listing links 1038587 with the supplied blower-motor geometry, connector and application information.
For catalogue item 6203-018, Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts. Use 6203-018 when comparing this 1038587 airflow configuration.
OE Reference and Application
The primary catalogue number is 1038587. The recorded application is FORD Galaxy. For 6203-018, Final approval should combine the OE reference with a direct geometry comparison of the removed part. Record 6203-018 with the approved OE reference.
HVAC Interface and 1038587 installation
During work on 6203-018, Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after 1038587 installation. Recheck 6203-018 before the lower trim is closed.
For item 6203-018, confirm that the 1038587 centrifugal wheel clears its housing and that the 6203-018 connector lock engages without force. After seating 6203-018, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6203-018.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 1038587 |
| Cross-reference numbers | 1109798 |
| Vehicle brand | FORD |
| Vehicle model | Galaxy |
| Model year | Confirm by OE reference |
| 1038587 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6203-018, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6203-018 record remains the picking reference.
For trade item 6203-018, Distributors can request neutral or customized packing after quantities, label content and destination are confirmed. Keep 6203-018 on the packing instruction.
Frequently Asked Questions
How should item 6203-018 and blower number 1038587 be verified?
Match 6203-018 to the complete 1038587 marking, then compare the 6203-018 plug, terminal count, mounting flange and wheel dimensions with the removed FORD unit.
Can 6203-018 have more than one vehicle-side blower configuration?
Yes. FORD production changes can affect 6203-018; confirm steering position, climate-control specification and the original 6203-018 geometry before approval.
What circuit checks are useful when 6203-018 does not operate?
For 6203-018, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6203-018 motor again.
Which details should accompany a wholesale request for 6203-018?
Provide item 6203-018, OE 1038587, the stated application, quantity and destination; add 6203-018 carton or private-label requirements separately.
How can noise be avoided after fitting 6203-018?
Clear debris from the air inlet, check that the 6203-018 wheel turns freely, seat the 6203-018 flange evenly and keep wiring away from the impeller.
Request a quote for 6203-018: Send 1038587, the 6203-018 application and required quantity for a fitment and supply review.
