07D121008A Automotive Water Pump for AUDI
Product: Automotive Water Pump
Primary OE: 07D121008A
Item code: AD01017-050
Cross-reference numbers:
07D121008A
07D121005N
07D121005R
Brand: AUDI
Application reference: AUDI OE-reference cooling-system application; confirm by VIN and removed-part comparison.
Inspection focus: housing profile, mounting flange, impeller or drive interface, ports, gasket face and connector where fitted
Supply note: Private-label and neutral packing can be reviewed for B2B orders.
07D121008A is presented as a vehicle-specific coolant-circulation component. This AUDI record identifies SKU AD01017050 through OE evidence. Buyers can therefore separate 07D121008A from similar-looking pumps.
Application approval for 07D121008A should combine the parts catalogue, VIN and removed component. No single dependable model is published for 07D121008A, so the Model filter remains blank for SKU AD01017050.
Product Technical Specifications
| Product type | Automotive Engine Water Pump |
|---|---|
| Primary OE reference | 07D121008A |
| Internal item code | AD01017-050 |
| Vehicle brand | AUDI |
| Model filter | Not specified; verify by VIN and original part |
| Cross-reference numbers | 07D121008A / 07D121005N / 07D121005R |
| Verification method | OE catalogue, VIN, production data and removed-pump comparison |
Direct Comparison with the Removed Pump
A correct 07D121008A replacement should sit naturally at every mounting point. Compare AD01017050 for casting shape, impeller clearance and accessory connections before workshop use.
Measure the pulley or drive location, mounting depth and port orientation on 07D121008A. Use the gallery to pre-screen AD01017050, then confirm dimensions on the physical sample.
Water Pump Contribution to Thermal Control
For the undefined application, 07D121008A is the mechanical link that keeps coolant travelling through the engine and heat exchanger. Consistent circulation helps the system control operating temperature.
07D121008A belongs in the undefined coolant-circulation path. Its task is to move heat-laden coolant toward the radiator while the engine is running.
Water Pump Application Approval
Screen 07D121008A through the AUDI application catalogue and verify the vehicle’s production information. Treat AD01017050 as an internal traceability code, not a substitute for VIN confirmation.
A reliable AUDI match starts with 07D121008A and ends with physical comparison. Use the VIN and engine code to decide whether AD01017050 has the correct configuration.
No dependable single model was available for 07D121008A, so the Model filter remains empty instead of publishing an assumption.
Leak Prevention and Handling
Rotate AD01017050 by hand and inspect the hub, casing and sealing face for transit damage. Commission 07D121008A with the vehicle maker’s coolant mixture and bleeding sequence.
Installation quality affects the service life of 07D121008A. Clean mating surfaces, avoid sealant excess and verify that AD01017050 operates without belt misalignment or coolant loss.
B2B Procurement Notes
To price 07D121008A, provide the AUDI vehicle evidence, order volume and destination port. Reference AD01017050 for traceable communication from sample to shipment.
Purchasing teams should put AD01017050 on the enquiry and retain 07D121008A on approval records. State the AUDI application evidence, target quantity and labelling requirements.
Product Identification FAQ
What does 07D121008A do in the cooling system?
OE 07D121008A identifies an engine water pump. In the AUDI vehicle cooling circuit, 07D121008A circulates coolant between heat-generating and heat-rejecting components.
How can an OE match be confirmed for 07D121008A?
Approve 07D121008A with VIN and catalogue data. Match SKU AD01017050 against the removed pump. Production changes can alter 07D121008A mounting or drive details.
Which physical details should match on 07D121008A?
Compare the 07D121008A housing, flange, ports, hub or pulley, impeller side and sealing face. Use the AD01017050 gallery for orientation. Measure 07D121008A before installation.
What faults can point to 07D121008A?
Inspect 07D121008A after coolant leakage, bearing noise, overheating or unstable circulation. During AD01017050 diagnosis, test belts, hoses, thermostat and coolant condition. Do not assume 07D121008A is the only cause.
Can packaging options be reviewed for 07D121008A?
Request 07D121008A pricing with item code AD01017050. Add quantity, destination and packaging instructions. Send original-part evidence when 07D121008A needs application review.
Ask About 07D121008A Export Packing
Send 07D121008A quantity and destination to Yongshang Auto. Identify the request with SKU AD01017050. Add packing details and original-pump evidence when 07D121008A needs application review.
Catalogue notice: 07D121008A identifies the reference, not guaranteed fitment. Confirm SKU AD01017050 through VIN, engine data and removed-pump comparison.
