06K121011 Automotive Water Pump for AUDI A3

06K121011 is organized for B2B cooling-pump selection. This AUDI A3 record identifies SKU AD01017041 through OE evidence. Buyers can therefore separate 06K121011 from similar-looking pumps.

Application approval for 06K121011 should combine the parts catalogue, VIN and removed component. The workbook provides A3 as a model reference, but SKU AD01017041 still requires vehicle-specific confirmation.

Product Technical Specifications

Why Pump Integrity Matters

06K121011 is catalogued for an undefined thermal-management application. The pump creates the circulation needed to carry engine heat into the radiator air stream.

06K121011 provides circulation for the undefined engine-cooling network. Its output must remain steady as engine speed and thermal load change.

Matching the Pump to the Vehicle

For AD01017041, review the complete AUDI OE chain around 06K121011. Superseded numbers may identify the same service family, but mounting and drive details still require confirmation.

Confirm AD01017041 against the removed AUDI unit rather than relying on appearance alone. Reference 06K121011, the build date and catalogue remarks should agree before ordering.

The workbook names A3 as an application clue for 06K121011; vehicle-specific catalogue evidence still governs the final match.

Practical Water Pump Comparison

Review the 3 square AD01017041 views for connector, pulley and casing orientation. Final acceptance of 06K121011 should include a ruler or fixture check against the old pump.

The practical comparison for AD01017041 includes fastener positions, hose connections and installed clearance. Match all visible features of 06K121011 before transferring any hardware.

Cooling-System Cleanliness Requirements

Keep AD01017041 clean and capped until installation. Fit 06K121011 with the specified seal, torque pattern and coolant procedure, then bleed trapped air from the system.

Before fitting 06K121011, flush contaminated coolant and inspect belts, pulleys and hoses. After AD01017041 is installed, check for leakage at both cold and operating temperature.

Export Packing and Sample Approval

For export supply of 06K121011, identify AD01017041 and specify carton, label and inspection expectations. A AUDI sample can be reviewed before the production batch is released.

Importers sourcing 06K121011 can identify the item internally as AD01017041. Add annual demand, packaging preference and delivery terms so the AUDI quotation is comparable.

Product Identification FAQ

What does 06K121011 do in the cooling system?

OE 06K121011 identifies an engine water pump. In the AUDI A3 cooling circuit, 06K121011 circulates coolant between heat-generating and heat-rejecting components.

Which evidence is required to approve 06K121011?

Approve 06K121011 with VIN and catalogue data. Match SKU AD01017041 against the removed pump. Production changes can alter 06K121011 mounting or drive details.

Which physical details should match on 06K121011?

Compare the 06K121011 housing, flange, ports, hub or pulley, impeller side and sealing face. Use the AD01017041 gallery for orientation. Measure 06K121011 before installation.

Which leakage signs should be checked around 06K121011?

Inspect 06K121011 after coolant leakage, bearing noise, overheating or unstable circulation. During AD01017041 diagnosis, test belts, hoses, thermostat and coolant condition. Do not assume 06K121011 is the only cause.

How does a buyer begin procurement of 06K121011?

Request 06K121011 pricing with item code AD01017041. Add quantity, destination and packaging instructions. Send original-part evidence when 06K121011 needs application review.

Confirm 06K121011 Before Ordering

Send 06K121011 quantity and destination to Yongshang Auto. Identify the request with SKU AD01017041. Add packing details and original-pump evidence when 06K121011 needs application review.

Ordering safeguard: 06K121011 identifies the reference, not guaranteed fitment. Confirm SKU AD01017041 through VIN, engine data and removed-pump comparison.