06E121016C Automotive Water Pump for AUDI S5
Product: Automotive Water Pump
Primary OE: 06E121016C
Item code: AD01017-047
Cross-reference numbers:
06E121016C
06E121016A
06E121016G
Brand: AUDI
Model: S5
Application reference: AUDI OE-reference cooling-system application; confirm by VIN and removed-part comparison.
Inspection focus: housing profile, mounting flange, impeller or drive interface, ports, gasket face and connector where fitted
Supply note: Confirm whether gaskets or service hardware are required.
06E121016C helps buyers distinguish the required water pump. This AUDI S5 record identifies SKU AD01017047 through OE evidence. Buyers can therefore separate 06E121016C from similar-looking pumps.
Application approval for 06E121016C should combine the parts catalogue, VIN and removed component. The workbook provides S5 as a model reference, but SKU AD01017047 still requires vehicle-specific confirmation.
Product Technical Specifications
| Product type | Automotive Engine Water Pump |
|---|---|
| Primary OE reference | 06E121016C |
| Internal item code | AD01017-047 |
| Vehicle brand | AUDI |
| Model filter | S5 |
| Cross-reference numbers | 06E121016C / 06E121016A / 06E121016G |
| Verification method | OE catalogue, VIN, production data and removed-pump comparison |
Pre-Installation Acceptance Checks
Handle AD01017047 by its housing and protect the gasket face. Follow the specified tightening sequence for 06E121016C, refill slowly and confirm heater circulation during bleeding.
Do not install 06E121016C into a dirty circuit. Examine AD01017047, renew approved sealing parts and verify free rotation before the engine is started.
Gasket Surface and Hub Orientation
Check 06E121016C for the correct impeller side, bearing hub and housing geometry. On AD01017047, even a small offset at the gasket surface can prevent a dependable seal.
Place the original unit and AD01017047 in the same orientation. Verify that 06E121016C shares the same flange plane, ports, drive interface and sealing profile.
Compatibility Checks for Distributors
Use 06E121016C as the first catalogue key, then confirm AD01017047 with the AUDI VIN and production date. An OE match alone is not sufficient when an engine family has mid-cycle changes.
Before approving AD01017047, enter 06E121016C in the relevant AUDI parts catalogue. Check engine code, build period and any supersession notes returned by the VIN.
The workbook names S5 as an application clue for 06E121016C; vehicle-specific catalogue evidence still governs the final match.
Wholesale Supply Information
For a AUDI purchasing review, send 06E121016C together with the required volume and shipping country. Quote AD01017047 when discussing carton marks or sample approval.
Wholesale enquiries should state 06E121016C, AD01017047, order quantity and destination. AUDI distributors can also request neutral packing, label review and a pre-production sample.
Cooling Circuit Flow Management
The purpose of 06E121016C on undefined vehicles is continuous coolant delivery. Stable flow reduces local hot spots and supports predictable thermostat and radiator operation.
Within the undefined cooling circuit, 06E121016C drives coolant through passages, hoses and the radiator. Pump condition therefore affects temperature stability throughout a drive cycle.
Application and Ordering FAQ
What does 06E121016C do in the cooling system?
OE 06E121016C identifies an engine water pump. In the AUDI S5 cooling circuit, 06E121016C circulates coolant between heat-generating and heat-rejecting components.
What should an importer check before ordering 06E121016C?
Approve 06E121016C with VIN and catalogue data. Match SKU AD01017047 against the removed pump. Production changes can alter 06E121016C mounting or drive details.
Which physical details should match on 06E121016C?
Compare the 06E121016C housing, flange, ports, hub or pulley, impeller side and sealing face. Use the AD01017047 gallery for orientation. Measure 06E121016C before installation.
Which symptoms justify checking 06E121016C?
Inspect 06E121016C after coolant leakage, bearing noise, overheating or unstable circulation. During AD01017047 diagnosis, test belts, hoses, thermostat and coolant condition. Do not assume 06E121016C is the only cause.
How should a purchasing team identify 06E121016C?
Request 06E121016C pricing with item code AD01017047. Add quantity, destination and packaging instructions. Send original-part evidence when 06E121016C needs application review.
Request a 06E121016C Wholesale Quote
Send 06E121016C quantity and destination to Yongshang Auto. Identify the request with SKU AD01017047. Add packing details and original-pump evidence when 06E121016C needs application review.
Catalogue notice: 06E121016C identifies the reference, not guaranteed fitment. Confirm SKU AD01017047 through VIN, engine data and removed-pump comparison.
