06E121005G Automotive Water Pump for AUDI A4
Product: Automotive Water Pump
Primary OE: 06E121005G
Item code: AD01017-040
Cross-reference numbers:
06E121005G
06E121005P
06E121008P
Brand: AUDI
Model: A4
Application reference: AUDI OE-reference cooling-system application; confirm by VIN and removed-part comparison.
Inspection focus: housing profile, mounting flange, impeller or drive interface, ports, gasket face and connector where fitted
Supply note: Sample approval is recommended before a production order.
06E121005G is an OE-number-led water-pump listing for global buyers. This AUDI A4 record identifies SKU AD01017040 through OE evidence. Buyers can therefore separate 06E121005G from similar-looking pumps.
Application approval for 06E121005G should combine the parts catalogue, VIN and removed component. The workbook provides A4 as a model reference, but SKU AD01017040 still requires vehicle-specific confirmation.
Product Technical Specifications
| Product type | Automotive Engine Water Pump |
|---|---|
| Primary OE reference | 06E121005G |
| Internal item code | AD01017-040 |
| Vehicle brand | AUDI |
| Model filter | A4 |
| Cross-reference numbers | 06E121005G / 06E121005P / 06E121008P |
| Verification method | OE catalogue, VIN, production data and removed-pump comparison |
Cooling Circuit Flow Management
06E121005G belongs in the undefined coolant-circulation path. Its task is to move heat-laden coolant toward the radiator while the engine is running.
For the undefined application, 06E121005G is the mechanical link that keeps coolant travelling through the engine and heat exchanger. Consistent circulation helps the system control operating temperature.
Vehicle Data Required for Fitment
A reliable AUDI match starts with 06E121005G and ends with physical comparison. Use the VIN and engine code to decide whether AD01017040 has the correct configuration.
Screen 06E121005G through the AUDI application catalogue and verify the vehicle’s production information. Treat AD01017040 as an internal traceability code, not a substitute for VIN confirmation.
The workbook names A4 as an application clue for 06E121005G; vehicle-specific catalogue evidence still governs the final match.
Critical Fitment Dimensions
Place the original unit and AD01017040 in the same orientation. Verify that 06E121005G shares the same flange plane, ports, drive interface and sealing profile.
Check 06E121005G for the correct impeller side, bearing hub and housing geometry. On AD01017040, even a small offset at the gasket surface can prevent a dependable seal.
Installation and Service Notes
Do not install 06E121005G into a dirty circuit. Examine AD01017040, renew approved sealing parts and verify free rotation before the engine is started.
Handle AD01017040 by its housing and protect the gasket face. Follow the specified tightening sequence for 06E121005G, refill slowly and confirm heater circulation during bleeding.
International Order Preparation
Purchasing teams should put AD01017040 on the enquiry and retain 06E121005G on approval records. State the AUDI application evidence, target quantity and labelling requirements.
To price 06E121005G, provide the AUDI vehicle evidence, order volume and destination port. Reference AD01017040 for traceable communication from sample to shipment.
Buyer Questions About This Water Pump
What does 06E121005G do in the cooling system?
OE 06E121005G identifies an engine water pump. In the AUDI A4 cooling circuit, 06E121005G circulates coolant between heat-generating and heat-rejecting components.
Which vehicle data helps confirm 06E121005G?
Approve 06E121005G with VIN and catalogue data. Match SKU AD01017040 against the removed pump. Production changes can alter 06E121005G mounting or drive details.
Which physical details should match on 06E121005G?
Compare the 06E121005G housing, flange, ports, hub or pulley, impeller side and sealing face. Use the AD01017040 gallery for orientation. Measure 06E121005G before installation.
What should be diagnosed before replacing 06E121005G?
Inspect 06E121005G after coolant leakage, bearing noise, overheating or unstable circulation. During AD01017040 diagnosis, test belts, hoses, thermostat and coolant condition. Do not assume 06E121005G is the only cause.
Which purchasing data supports a quote for 06E121005G?
Request 06E121005G pricing with item code AD01017040. Add quantity, destination and packaging instructions. Send original-part evidence when 06E121005G needs application review.
Contact Yongshang Auto About 06E121005G
Send 06E121005G quantity and destination to Yongshang Auto. Identify the request with SKU AD01017040. Add packing details and original-pump evidence when 06E121005G needs application review.
Installation reminder: 06E121005G identifies the reference, not guaranteed fitment. Confirm SKU AD01017040 through VIN, engine data and removed-pump comparison.
