06B121011M Automotive Water Pump for AUDI A3
Product: Automotive Water Pump
Primary OE: 06B121011M
Item code: AD01017-025
Cross-reference numbers:
06B121011M
06B121011H
06B121011HX
06B121011HV
06B121011MX
Brand: AUDI
Model: A3
Application reference: AUDI OE-reference cooling-system application; confirm by VIN and removed-part comparison.
Inspection focus: housing profile, mounting flange, impeller or drive interface, ports, gasket face and connector where fitted
Supply note: Confirm whether gaskets or service hardware are required.
06B121011M is presented as a vehicle-specific coolant-circulation component. This AUDI A3 record identifies SKU AD01017025 through OE evidence. Buyers can therefore separate 06B121011M from similar-looking pumps.
Application approval for 06B121011M should combine the parts catalogue, VIN and removed component. The workbook provides A3 as a model reference, but SKU AD01017025 still requires vehicle-specific confirmation.
Product Technical Specifications
| Product type | Automotive Engine Water Pump |
|---|---|
| Primary OE reference | 06B121011M |
| Internal item code | AD01017-025 |
| Vehicle brand | AUDI |
| Model filter | A3 |
| Cross-reference numbers | 06B121011M / 06B121011H / 06B121011HX / 06B121011HV / 06B121011MX |
| Verification method | OE catalogue, VIN, production data and removed-pump comparison |
Part-Number Validation Process
Use 06B121011M as the first catalogue key, then confirm AD01017025 with the AUDI VIN and production date. An OE match alone is not sufficient when an engine family has mid-cycle changes.
Before approving AD01017025, enter 06B121011M in the relevant AUDI parts catalogue. Check engine code, build period and any supersession notes returned by the VIN.
The workbook names A3 as an application clue for 06B121011M; vehicle-specific catalogue evidence still governs the final match.
Engine Temperature Management
The purpose of 06B121011M on undefined vehicles is continuous coolant delivery. Stable flow reduces local hot spots and supports predictable thermostat and radiator operation.
Within the undefined cooling circuit, 06B121011M drives coolant through passages, hoses and the radiator. Pump condition therefore affects temperature stability throughout a drive cycle.
Installation Quality-Control Priorities
Handle AD01017025 by its housing and protect the gasket face. Follow the specified tightening sequence for 06B121011M, refill slowly and confirm heater circulation during bleeding.
Do not install 06B121011M into a dirty circuit. Examine AD01017025, renew approved sealing parts and verify free rotation before the engine is started.
Installation Interface Review
Check 06B121011M for the correct impeller side, bearing hub and housing geometry. On AD01017025, even a small offset at the gasket surface can prevent a dependable seal.
Place the original unit and AD01017025 in the same orientation. Verify that 06B121011M shares the same flange plane, ports, drive interface and sealing profile.
Procurement Data for Importers
For a AUDI purchasing review, send 06B121011M together with the required volume and shipping country. Quote AD01017025 when discussing carton marks or sample approval.
Wholesale enquiries should state 06B121011M, AD01017025, order quantity and destination. AUDI distributors can also request neutral packing, label review and a pre-production sample.
Water Pump Fitment FAQ
What does 06B121011M do in the cooling system?
OE 06B121011M identifies an engine water pump. In the AUDI A3 cooling circuit, 06B121011M circulates coolant between heat-generating and heat-rejecting components.
What prevents a wrong-part order for 06B121011M?
Approve 06B121011M with VIN and catalogue data. Match SKU AD01017025 against the removed pump. Production changes can alter 06B121011M mounting or drive details.
Which physical details should match on 06B121011M?
Compare the 06B121011M housing, flange, ports, hub or pulley, impeller side and sealing face. Use the AD01017025 gallery for orientation. Measure 06B121011M before installation.
Which leakage signs should be checked around 06B121011M?
Inspect 06B121011M after coolant leakage, bearing noise, overheating or unstable circulation. During AD01017025 diagnosis, test belts, hoses, thermostat and coolant condition. Do not assume 06B121011M is the only cause.
What is required for an export enquiry on 06B121011M?
Request 06B121011M pricing with item code AD01017025. Add quantity, destination and packaging instructions. Send original-part evidence when 06B121011M needs application review.
Plan a 06B121011M Sample Order
Send 06B121011M quantity and destination to Yongshang Auto. Identify the request with SKU AD01017025. Add packing details and original-pump evidence when 06B121011M needs application review.
Application note: 06B121011M identifies the reference, not guaranteed fitment. Confirm SKU AD01017025 through VIN, engine data and removed-pump comparison.
