05143099AB Blower Motor for JEEP
Primary OE reference: 05143099AB
Cross-reference 1: 111775806
Cross-reference 2: 2015632
Cross-reference 3: 219239
Cross-reference 4: 2311658
Product type: Automotive HVAC Blower Motor
Applicable vehicle: JEEP
Brand: JEEP
Model: Confirm by OE reference
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: The blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode.
Installation guidance: Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after installation.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
05143099AB Automotive Blower Motor Overview
This listing links 05143099AB with the supplied blower-motor geometry, connector and application information.
For catalogue item 6217-081, Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts. Use 6217-081 when comparing this 05143099AB airflow configuration.
OE Reference and Application
The primary catalogue number is 05143099AB. The recorded application is JEEP. For 6217-081, Final approval should combine the OE reference with a direct geometry comparison of the removed part. Record 6217-081 with the approved OE reference.
HVAC Interface and 05143099AB installation
During work on 6217-081, Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after 05143099AB installation. Recheck 6217-081 before the lower trim is closed.
For item 6217-081, confirm that the 05143099AB centrifugal wheel clears its housing and that the 6217-081 connector lock engages without force. After seating 6217-081, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6217-081.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 05143099AB |
| Cross-reference numbers | 111775806 / 2015632 / 219239 / 2311658 |
| Vehicle brand | JEEP |
| Vehicle model | Confirm by OE reference |
| Model year | Confirm by OE reference |
| 05143099AB installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6217-081, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6217-081 record remains the picking reference.
For trade item 6217-081, Wholesale enquiries should identify the reference, quantity, market and packaging requirement so the correct variant is selected. Keep 6217-081 on the packing instruction.
Frequently Asked Questions
How should item 6217-081 and blower number 05143099AB be verified?
Match 6217-081 to the complete 05143099AB marking, then compare the 6217-081 plug, terminal count, mounting flange and wheel dimensions with the removed JEEP unit.
Can 6217-081 have more than one vehicle-side blower configuration?
Yes. JEEP production changes can affect 6217-081; confirm steering position, climate-control specification and the original 6217-081 geometry before approval.
What circuit checks are useful when 6217-081 does not operate?
For 6217-081, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6217-081 motor again.
Which details should accompany a wholesale request for 6217-081?
Provide item 6217-081, OE 05143099AB, the stated application, quantity and destination; add 6217-081 carton or private-label requirements separately.
How can noise be avoided after fitting 6217-081?
Clear debris from the air inlet, check that the 6217-081 wheel turns freely, seat the 6217-081 flange evenly and keep wiring away from the impeller.
Request a quote for 6217-081: Send 05143099AB, the 6217-081 application and required quantity for a fitment and supply review.
