04718-3WO-A00 Bumper Corner Trim for HONDA ZR-V 2023 Left

04718-3WO-A00 Bumper Corner Trim Product Overview

For HONDA ZR-V 2023 exterior repair sourcing, OE reference 04718-3WO-A00 points to the listed bumper corner trim. Catalogue code HD02005-134 belongs to the rear area and should be checked as an application-specific component.

For replacement work on HONDA ZR-V 2023, retain the old trim until trial fitting is complete. Also check adjacent garnish pieces, review the centre alignment, clean the mounting channel, and confirm sample requirements.

Fitment and Application for ZR-V

When comparing 04718-3WO-A00 with the removed part, confirm the production year, review market-specific styling, and compare the mounting direction. Before final installation, compare every attachment point, confirm the surface specification, and review facelift differences.

For the listed 2023 application, check nearby lamp openings, match the bumper outline, and review the end profiles. During receiving inspection, match the original clip spacing, compare the complete OE number, and review facelift differences.

Before the removed component is discarded, review the end profiles, compare the complete OE number, and compare every attachment point. Before the quotation is confirmed, compare the removed trim, confirm the vehicle market, and inspect the original contour.

Bumper Corner Trim Design and Replacement Notes

Before confirming this verify against the original part bumper corner trim, compare the end termination, check the panel transition, and compare gloss or plating. For a repeat wholesale order, check the adjoining gap, compare the original length, and check the bumper interface.

For HONDA ZR-V 2023, check the adjoining gap, review nearby cover openings, and compare the original edge profile. While reviewing the supplied photographs, inspect the fastening slots, check the adjoining gap, and review nearby cover openings.

When preparing a ZR-V exterior repair, compare visible edge height, compare the end termination, and compare the original length. Before final installation, compare the original edge profile, compare gloss or plating, and compare visible edge height.

For a direct comparison of 04718-3WO-A00, compare the complete OE number, compare the original edge profile, clean the mounting channel, and check the ordered mounting side. The bumper corner trim should match the original left rear profile before it is installed or released for shipment.

Installation Guidance

When comparing 04718-3WO-A00 with the removed part, check lamp-cover clearance, review separate hardware needs, and inspect the surrounding guides. When checking the visible exterior face, protect the visible surface, transfer reusable clips carefully, and retain the removed component.

For the listed 2023 application, confirm an even seated fit, trial-fit without force, and retain the removed component. At the workshop preparation stage, confirm an even seated fit, trial-fit without force, and retain the removed component.

Before the removed component is discarded, protect the visible surface, align the centre first, and transfer reusable clips carefully. For a repeat wholesale order, confirm locator engagement, retain the removed component, and inspect every screw point.

Product Technical Specifications

Wholesale Supply and Packing

Before confirming this verify against the original part bumper corner trim, state the destination port, include the complete OE number, and retain the product label. Before clips or hardware are transferred, check the ordered mounting side, request protective inner packing, and request supported carton packing.

For HONDA ZR-V 2023, include the complete OE number, confirm the surface requirement, and request supported carton packing. During the physical comparison, protect projecting locators, support the moulding length, and inspect the receiving condition.

When preparing a ZR-V exterior repair, retain the product label, confirm separate accessory needs, and request export quotation terms. When checking the visible exterior face, request protective inner packing, include the complete OE number, and support the moulding length.

Before commercial confirmation, verify that the offer cites 04718-3WO-A00, HD02005-134 and the left application. Ask for packaging that supports the moulding length without rubbing its visible face.

Frequently Asked Questions

Can a photo alone verify 04718-3WO-A00?

A photograph helps compare outline and finish, but it cannot replace the OE number or vehicle vehicle details. Review 04718-3WO-A00 and HD02005-134 with the removed part dimensions. For ZR-V, review market-specific styling, compare the original length, inspect the surrounding guides, and check the ordered mounting side before installation or quotation.

Is professional installation recommended for 04718-3WO-A00?

Yes. A workshop can dry-fit HD02005-134, correct damaged mounting areas and avoid forcing clips into a mismatched body panel. For ZR-V, match the original clip spacing, review the centre alignment, check lamp-cover clearance, and confirm sample requirements before installation or quotation.

Can the opposite-side trim replace 04718-3WO-A00?

Normally no. The listing specification details the left orientation, and opposite-side curvature or fastener direction may differ even when the finish appears identical. For ZR-V, verify the mounting side, check the bumper interface, trial-fit without force, and request supported carton packing before installation or quotation.

What product does OE 04718-3WO-A00 identify?

04718-3WO-A00 is listed here as a bumper corner trim. It is not presented as a complete bumper assembly, and the buyer should compare the original component before ordering. For ZR-V, check the vehicle build date, inspect the fastening slots, check the final perimeter, and state the required quantity before installation or quotation.

How should the position of 04718-3WO-A00 be confirmed?

This listing specification details a left component for the rear area. Compare the removed part, mounting direction and termination points before confirmation. For ZR-V, confirm the vehicle market, compare visible edge height, confirm locator engagement, and request export quotation terms before installation or quotation.

Request a Quote

Send the complete OE reference 04718-3WO-A00, vehicle details, quantity and destination. Yongshang Auto can review the application before preparing a product-specific export quotation.