04717-TXE-H60 Bumper Corner Trim for HONDA UR-V 2021 Right

04717-TXE-H60 Bumper Corner Trim Product Overview

HONDA UR-V 2021 buyers can begin identification with 04717-TXE-H60. This bumper corner trim is registered under HD02005-124, with right orientation retained for quotation, sample review and receiving control.

Selection for UR-V should combine OE 04717-TXE-H60, body version and attachment geometry. Also review facelift differences, review the centre alignment, protect painted panel edges, and confirm sample requirements.

Fitment and Application for UR-V

For wholesale selection of 04717-TXE-H60, check the vehicle build date, check adjacent garnish pieces, and compare the complete OE number. Before final installation, verify the mounting side, confirm the installation position, and compare the removed trim.

Before sourcing this bumper corner trim for UR-V, compare the mounting direction, inspect the original contour, and compare the removed trim. During receiving inspection, compare the complete OE number, check nearby lamp openings, and confirm the surface specification.

Before confirming this verify against the original part bumper corner trim, verify the mounting side, compare every attachment point, and confirm the installation position. Before the quotation is confirmed, match the bumper outline, compare the removed trim, and confirm the surface specification.

Bumper Corner Trim Design and Replacement Notes

For a replacement on the right rear area, compare visible edge height, check the moulding curvature, and compare gloss or plating. For a repeat wholesale order, check the bumper interface, compare the original edge profile, and check the panel transition.

When separating nearby UR-V trim variants, check the moulding curvature, review the centre alignment, and compare the end termination. While reviewing the supplied photographs, inspect the fastening slots, check the panel transition, and review the surface texture.

When comparing 04717-TXE-H60 with the removed part, compare gloss or plating, compare the original length, and compare visible edge height. Before final installation, compare the original edge profile, compare the end termination, and compare gloss or plating.

For a direct comparison of 04717-TXE-H60, confirm the vehicle market, compare the original length, inspect the surrounding guides, and support the moulding length. The bumper corner trim should match the original right rear profile before it is installed or released for shipment.

Installation Guidance

For wholesale selection of 04717-TXE-H60, align the centre first, inspect every screw point, and confirm the final trim gap. When checking the visible exterior face, check adjacent panel gaps, review separate hardware needs, and protect the visible surface.

Before sourcing this bumper corner trim for UR-V, retain the removed component, confirm the fitting direction, and check the final perimeter. At the workshop preparation stage, inspect the surrounding guides, support the trim evenly, and align the centre first.

Before confirming this verify against the original part bumper corner trim, check the final perimeter, support the trim evenly, and check adjacent panel gaps. For a repeat wholesale order, confirm the fitting direction, inspect the surrounding guides, and align the centre first.

Product Technical Specifications

Wholesale Supply and Packing

For a replacement on the right rear area, confirm separate accessory needs, check the ordered mounting side, and request export quotation terms. Before clips or hardware are transferred, state the destination port, request protective inner packing, and provide the delivery country.

When separating nearby UR-V trim variants, state the destination port, send original-part photographs, and support the moulding length. During the physical comparison, review carton edge protection, request export quotation terms, and state the required quantity.

When comparing 04717-TXE-H60 with the removed part, include the complete OE number, state the target application, and state the destination port. When checking the visible exterior face, request supported carton packing, confirm separate accessory needs, and request protective inner packing.

Order review for 04717-TXE-H60 should connect supplier code HD02005-124 with the rear application, buyer-approved photos and logistics instructions. Keep the same identifiers on samples and shipping paperwork.

Frequently Asked Questions

Can a photo alone verify 04717-TXE-H60?

A photograph helps compare outline and finish, but it cannot replace the OE number or vehicle vehicle details. Review 04717-TXE-H60 and HD02005-124 with the removed part dimensions. For UR-V, confirm the installation position, compare the end termination, confirm an even seated fit, and support the moulding length before installation or quotation.

Is professional installation recommended for 04717-TXE-H60?

Yes. A workshop can dry-fit HD02005-124, correct damaged mounting areas and avoid forcing clips into a mismatched body panel. For UR-V, check adjacent garnish pieces, review nearby cover openings, avoid bending long sections, and send original-part photographs before installation or quotation.

Can the opposite-side trim replace 04717-TXE-H60?

Normally no. The listing specification details the right orientation, and opposite-side curvature or fastener direction may differ even when the finish appears identical. For UR-V, review facelift differences, check the panel transition, support the trim evenly, and state the destination port before installation or quotation.

What product does OE 04717-TXE-H60 identify?

04717-TXE-H60 is listed here as a bumper corner trim. It is not presented as a complete bumper assembly, and the buyer should compare the original component before ordering. For UR-V, match the bumper outline, inspect the moulding width, protect painted panel edges, and compare the supplied photographs before installation or quotation.

How should the position of 04717-TXE-H60 be confirmed?

This listing specification details a right component for the rear area. Compare the removed part, mounting direction and termination points before confirmation. For UR-V, compare the mounting direction, compare gloss or plating, transfer reusable clips carefully, and retain the product label before installation or quotation.

Request a Quote

Send the complete OE reference 04717-TXE-H60, vehicle details, quantity and destination. Yongshang Auto can review the application before preparing a product-specific export quotation.