86695-L2000 Rear Bumper Air Deflector for KIA K5 2021
Product: Rear Bumper Air Deflector
Primary OE: 86695-L2000
Item code: KA02002-017
Cross-reference numbers:
86695-L2000
Brand: KIA
Model: K5
Application reference: 2021 KIA K5
Position: Rear
Verification: Approve this rear cover only after the OE record, vehicle specification and mounting geometry agree.
Supply note: State mixed-order requirements, carton marks and pre-shipment photo needs at the quotation stage.
86695-L2000 is presented for collision-repair sourcing where the OE reference is the first approval point. For 2021 KIA K5, Yongshang Auto tracks the requested rear bumper air deflector as KA02002-017.
KA02002-017 requires an application-specific review: Before paint preparation, workshops should dry-check the outline and verify that every required opening matches the vehicle equipment. The buyer can then connect the physical review to the supplier item record.
Generation and Equipment Verification
Fitment guidance for 86695-L2000. Begin with the complete OE string, then compare the model year and installation position against the vehicle record. Add VIN and production-date evidence whenever the catalogue shows a change within the same generation. This approach reduces dependence on exterior appearance alone.
The rear location on 2021 KIA K5 should be reviewed as follows: Retain the original-part label and wide-angle vehicle photographs in the approval file. This creates a traceable reference if questions arise during sample inspection. This sequence keeps catalogue selection separate from cosmetic preparation.
Product Technical Specifications
| Product type | Rear Bumper Air Deflector |
|---|---|
| Primary OE reference | 86695-L2000 |
| Cross-reference numbers | 86695-L2000 |
| Internal item code | KA02002-017 |
| Vehicle brand | KIA |
| Vehicle model | K5 |
| Model year | 2021 |
| Installation position | Rear lower bumper area |
| Applicable vehicle | 2021 KIA K5 |
Outer-Surface Repair Considerations
Functional context for 86695-L2000. A well-matched cover supports consistent body lines and easier transfer of compatible trim parts. The vehicle-side support hardware must also remain correctly positioned. This review is especially useful near model-year or equipment transitions.
Application note for item KA02002-017. A well-matched cover supports consistent body lines and easier transfer of compatible trim parts. The vehicle-side support hardware must also remain correctly positioned. This review is especially useful near model-year or equipment transitions.
Handling the lower-bumper component Before Installation
Receiving note for carton KA02002-017. Verify that the lower-bumper component has the expected upper, lower and side attachment features. Stop the process if a major interface differs from the original vehicle part. The purchase team can use the recorded result when confirming the order line.
Pre-finish check for 2021 KIA K5. Verify that the lower-bumper component has the expected upper, lower and side attachment features. Stop the process if a major interface differs from the original vehicle part. The purchase team can use the recorded result when confirming the order line.
Order Details for Wholesale Buyers
A quotation for 86695-L2000 should reflect this guidance: Confirm the delivery market and preferred transport method. Packing design can differ between sample courier movement, consolidated sea freight and full-container supply. This sequence keeps catalogue selection separate from cosmetic preparation.
The 1 square image attached to KA02002-017 support visual review. For a mixed order, provide a line-by-line quantity schedule and a corresponding label format. This helps warehouse teams maintain part identity during consolidation. This approach reduces dependence on exterior appearance alone.
Frequently Asked Questions
Which evidence is most useful when checking OE 86695-L2000?
2021 KIA K5 is the stated reference for this page. Check whether the repair needs a complete lower-bumper component, upper cover or lower cover. Section identity is part of the fitment decision. A dated photo record makes the decision easier to review if questions arise later.
Why is KA02002-017 useful on a mixed body-parts order?
Supplier-code context for this rear bumper air deflector. Send a clear old-part photograph together with the vehicle application. This gives the commercial team a practical comparison record before confirming price and lead time. Keep KA02002-017 beside 86695-L2000 in the final commercial record.
What geometry should be checked against the removed panel?
Panel-comparison guidance for 2021 KIA K5. Compare the new panel in an unpainted trial fit using serviceable vehicle-side brackets. Stop if gaps or mounting points require force. The buyer can then connect the physical review to the supplier item record.
Which approvals should precede sanding or drilling?
Finishing guidance for OE 86695-L2000. The body shop should verify the complete assembly interface before any irreversible preparation is carried out. The result should be recorded before commercial release of the requested quantity.
Which details are needed to quote OE 86695-L2000 for wholesale supply?
Wholesale request for KA02002-017. Keep the OE reference and internal code on every enquiry revision, purchase order and packing confirmation to reduce mix-ups during consolidation. This evidence belongs in the same approval file as the vehicle photographs.
Request a Quote for 86695-L2000
Confirm whether samples require workshop trial fitting before bulk release. A documented approval stage is valuable when supplying several regional vehicle variants. For Yongshang Auto’s review, connect 86695-L2000 and KA02002-017 with the intended 2021 KIA K5, requested quantity and delivery market.
