86690-2T500 Rear Bumper Air Deflector for KIA K5 2014

86690-2T500 helps purchasing teams identify the requested bumper lip before packaging and freight are discussed. For 2014 KIA K5 (single-exhaust layout), Yongshang Auto tracks the requested rear bumper air deflector as KA02002-011.

KA02002-011 requires an application-specific review: The quotation should state whether the request concerns a complete lower-bumper component, an upper section or a lower section to avoid an incorrect comparison. The result should be recorded before commercial release of the requested quantity.

Compatibility Review for This Reference

Fitment guidance for 86690-2T500. Review the mounting system as a complete assembly. Correct selection depends on the relationship between the lower-bumper component, retainers, reinforcement, absorber and surrounding trim. This evidence belongs in the same approval file as the vehicle photographs.

The rear location on 2014 KIA K5 (single-exhaust layout) should be reviewed as follows: If the original cover is missing, provide VIN data and clear photographs of the uncovered vehicle structure. The supplier may need additional evidence before confirming the reference. A dated photo record makes the decision easier to review if questions arise later.

Product Technical Specifications

Why Panel Geometry Matters

Functional context for 86690-2T500. Its broad surface restores the visual continuity of the vehicle after damage. The repairer should evaluate waviness, edge condition and aperture shape during incoming inspection. The buyer can then connect the physical review to the supplier item record.

Application note for item KA02002-011. The outer lower-bumper component contributes to styling and low-speed surface protection, but it is not a substitute for the reinforcement system. Buyers should quote each required assembly part separately. The same information helps receiving staff identify the correct carton and panel.

Surface Review Before Refinishing

Receiving note for carton KA02002-011. After unpacking, compare left and right symmetry and inspect the corner returns. These checks help identify handling distortion before the panel reaches the paint booth. A dated photo record makes the decision easier to review if questions arise later.

Pre-finish check for 2014 KIA K5 (single-exhaust layout). Record the condition with dated photographs before workshop preparation. This separates transport observations from marks introduced during trial fitting or refinishing. The same information helps receiving staff identify the correct carton and panel.

Purchase Planning for Volume-Sensitive Parts

A quotation for 86690-2T500 should reflect this guidance: Ask for pre-shipment photographs when the purchase programme requires packaging approval. The record should show item labels, carton condition and loading arrangement. This review is especially useful near model-year or equipment transitions.

The 1 square image attached to KA02002-011 support visual review. If colours, mouldings or accessories are shown in reference photographs, clarify whether they are included. The listing describes the outer lower-bumper component unless a quotation states otherwise. This sequence keeps catalogue selection separate from cosmetic preparation.

Frequently Asked Questions

How can the vehicle specification be matched to OE 86690-2T500?

2014 KIA K5 (single-exhaust layout) is the stated reference for this page. Use build-month data near facelift changes. Registration year by itself may not identify the correct generation boundary. This approach reduces dependence on exterior appearance alone.

What is the purpose of keeping KA02002-011 beside OE 86690-2T500?

Supplier-code context for this rear bumper air deflector. State whether the order is a sample, mixed-model shipment or repeat programme. bumper lips and lower valances are volume-sensitive, so carton and loading assumptions should be discussed before the freight quotation. Keep KA02002-011 beside 86690-2T500 in the final commercial record.

Which adjacent components help confirm the panel profile?

Panel-comparison guidance for 2014 KIA K5 (single-exhaust layout). Request a full photographic record of the removed lower-bumper part and vehicle. Include labels, side retainers, upper fixings, lower mounts and all grille or lamp openings. This approach reduces dependence on exterior appearance alone.

Why should the panel remain unpainted during fitment review?

Finishing guidance for OE 86690-2T500. Separate geometry approval from cosmetic preparation. If alignment needs force, stop and inspect the reference and vehicle-side retainers. The repairer should document the outcome before transferring trim components.

What should the buyer confirm before a repeat order is released?

Wholesale request for KA02002-011. For bulk demand, identify the accepted sample or previous order and add the new quantity, destination and any updated label instructions. That comparison gives the workshop a clearer basis for a pre-paint decision.

Request a Quote for 86690-2T500

Request packing dimensions and gross-volume estimates before finalising freight. bumper lips and lower valances can be lightweight but consume substantial shipment space. For Yongshang Auto’s review, connect 86690-2T500 and KA02002-011 with the intended 2014 KIA K5 (single-exhaust layout), requested quantity and delivery market.